1.2 m轻量化SiC主镜支撑系统优化设计

邵亮; 杨飞; 王富国; 吴小霞

doi:10.3788/CO.20120503.0229

1.2 m轻量化SiC主镜支撑系统优化设计

doi: 10.3788/CO.20120503.0229

中国科学院长春光学精密机械与物理研究所,吉林长春 130033

基金项目:

国家863高技术研究发展计划资助项目(No.2009AA8080603);国家科技部国际科技合作资助项目(No.2011DFA50590)

详细信息

通讯作者:
邵亮

中图分类号: P111.22
计量
- 文章访问数: 3458
- HTML全文浏览量: 490
- PDF下载量: 1025
- 被引次数: 0
出版历程
- 收稿日期: 2012-01-18
- 修回日期: 2012-03-17
- 刊出日期: 2012-06-10

Design and optimization of supporting system for 1.2 m lightweight SiC primary mirror

Changchun Institute of Optics,Fine Mechanics and Physics, Chinese Academy of Sciences,Changchun 130033,China

摘要

摘要: 针对1.2 m轻量化SiC主镜,提出了轴向支撑采用18点Whiffle-tree结构结合压杆结构,侧向支撑采用A-Frame柔性机构结合切向支撑机构的支撑方案。从原理上对该主镜支撑方案进行了分析,说明了采用以上两种结构的优点;通过有限元方法对各个机构参数进行了分析、优化,并对整体结构进行了静力学以及热学仿真。实验显示:在参考温度下主镜面形精度(RMS)值为3.5 nm;温差达到40 ℃时,RMS值为11.1 nm。该设计方案满足了1.2 m轻量化SiC主镜的支撑要求,同时可以很好地抵消热应力对主镜的影响。
- 轻量化SiC主镜 /
- 支撑系统 /
- 压杆结构 /
- A-Frame
Abstract: A design based on 1.2 m lightweight SiC primary mirror is presented. An 18 point Whiffle-tree structure and a pressure bar are used for the axial support, and an A-Frame flexure mechanism and a tangent link are used for the lateral supporting system. The project of primary mirror design is disscussed in the principle, and the advantages are given. The parameters of mechanism are analyzed and optimized by the Finite Element Analysis(FEA) method. The whole FEA model is established, and the statics and thermal simulation analysis are accomplished. Experiments indicate that the Root Mean Square(RMS) of the mirror resulted from the supporting system is 3.5 nm at reference temperature, and it is 11.1 nm when the temperature difference is 40 ℃. The results show that the design could suit for the 1.2 m lightweight SiC mirror well, and thermal effect could be compensated successfully.
- lightweight SiC primary mirror /
- supporting system /
- pressure bar mechanism /
- A-frame

HTML全文

参考文献(1)

[1] 程景全.天文望远镜原理和设计[M]. 北京:中国科学技术出版社,2002. CHENG J Q. Principles of Astronomical Telescope Design[M]. Beijing:China Science & Technology Press,2002.(in Chinese) [2] 王富国,张景旭,杨飞,等. 1.2 m SiC主镜轻量化设计与分析[J]. 光学精密工程 ,2008,16 (专辑):117-122. WANG F G,ZHANG J X,YANG F,et al.. Lightweight design and analysis for a 1.2 m SiC primary mirror[J]. Opt. Precision Eng.,2008,16(Special):117-122.(in Chinese) [3] 杨德华,邵亮. 基于ANSYS UIDL的镜面轴向支撑机构CAE系统的实现[J]. 天文研究与技术 ,2008,5(3):312-318. YANG D H,SHAO L. ANSYS UIDL-based CAE development of axial support system for optics mirrors[J]. Astronomical Res. Technology,2008,5(3):312-318.(in Chinese) [4] NEILL D R,KRABBENDAM V,ANDREW J,et al.. Active tangent link system for transverse support of large thin meniscus mirrors[J]. SPIE,2007,6665:66650F. [5] 杨德华,向伟玮. 摆臂式三点光学镜面支撑系统的研究[J]. 光学技术 ,2005,31(4):580-582. YANG D H,xianG W W. Study on three-swing-jib support system for optics mirror[J]. Opt. Technique,2005,31(4):580-585.(in Chinese) [6] BITTNER H,ERDMANN M,HABERLER P,et al.. SOFIA primary mirror assembly: structural properties and optical performance[J]. SPIE,2003,4857:266-273. [7] SOAR Telescope report. The SOAR telescope-status and prospects .(2003-09-01) .http://www.soartelescope.org/observing/soar-status/?searchterm=the soar telescope-status. [8] 崔向群. 采用主动光学的大口径单块薄镜面的支撑系统 .南京:中科院紫金山天文台,1995. CUI X Q. Support system of large aperture thin monolithic primary mirror with active optics . Nanjing:Purple Mountain Observatory CAS,1995.(in Chinese) [9] YODER P R. 光机系统设计 [M]. 3版. 北京:机械工业出版社,2008. YODER P R. Opto-Mechanical Systems Design[M]. 3rd ed.. Beijing:China Machine Press,2008.(in Chinese) [10] 王建立,陈涛. 空间目标监视用地基高分辨率光电成像望远镜总体需求及关键技术分析[J] .中国光学与应用光学 ,2008,1(1):36-48. WANG J L,CHEN T. General requirments and key technologies of ground-based high resolution OE imaging telescope for space target surveillance[J]. Chinese J. Opt. Appl. Optics,2008,1(1):36-48.(in Chinese)

施引文献

附加信息(0)

访问统计