应用方位反向技术提取反射镜零重力面形

杨利伟; 李志来; 薛栋林; 董得义; 樊延超; 曾雪锋

doi:10.3788/CO.20160905.0606

Volume 9 Issue 5

Sep. 2016

Turn off MathJax

Article Contents

Chinese Optics > 2016 > 9(5): 606-612.

YANG Li-wei, LI Zhi-lai, XUE Dong-lin, DONG De-yi, FAN Yan-chao, ZENG Xue-feng. Extracting zero-gravity surface figure of mirror by orientation reversal[J]. Chinese Optics, 2016, 9(5): 606-612. doi: 10.3788/CO.20160905.0606

Citation:

YANG Li-wei, LI Zhi-lai, XUE Dong-lin, DONG De-yi, FAN Yan-chao, ZENG Xue-feng. Extracting zero-gravity surface figure of mirror by orientation reversal[J]. Chinese Optics, 2016, 9(5): 606-612. doi: 10.3788/CO.20160905.0606

Citation:

PDF( 1781 KB)

Extracting zero-gravity surface figure of mirror by orientation reversal

doi: 10.3788/CO.20160905.0606

Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China

Funds:

National High-tech & D Program of China 2011AA7026057

Received Date: 25 Apr 2016
Rev Recd Date: 29 May 2016
Publish Date: 01 Oct 2016

Abstract

Abstract

In order to estimate the SiC mirror surface figure under the space zero-gravity environment, extracting zero-gravity surface figure of SiC mirror by orientation reversal under ground environment was studied. Firstly, the principle of extracting zero-gravity surface figure by orientation reversal is introduced. Secondly, the effect of orientation reversal on mirror surface figure is analysed by finite element analysis software. Then, according to the flow chart, mirror surface figure of 0° and 180° conditions are tested successively, and the zero-gravity surface figure is obtained by average two measurements. The data indicate that the RMS value of the ground zero-gravity surface figure of mirror is 12.3nm, which meets the design requirement. Last, data credibility is analysed and confirmed. The obtained results indicate the mirror surface figure in the zero-gravity environment of space, which has important significance for optical fabrication and alignment of mirror.
- orientation reversal,
- SiC mirror,
- zero-gravity surface figure,
- optical test

FullText(HTML)

References(17)

References

[1]	KORHONEN T, KEINANEN P, PASANEN M, et al..Polishing and testing of the 3.5 m SiC M1 mirror of the Herschel space observatory of ESA[J].SPIE, 2008, 7102:710218_1-710218_7. https://www.researchgate.net/publication/253376797_Polishing_and_testing_of_the_35_m_SiC_M1_mirror_of_the_Herschel_space_observatory_of_ESA
[2]	KANEDA H, NAKAGAWA T, ENYA K, et al..Optical testing activities for the SPICA telescope[J].SPIE, 2010, 7731:77310V_1-77310V_7. https://www.researchgate.net/publication/253211540_Optical_testing_activities_for_the_SPICA_telescope
[3]	李宗轩, 金光, 张雷, 等.3.5 m口径空间望远镜单块式主镜技术展望[J].中国光学, 2014, 7(4):532-541. http://www.opticsjournal.net/Articles/Abstract?aid=OJ0818000452QnTpWs LI Z X, JIN G, ZHANG L, et al..Overview and outlook of monolithic primary mirror of spaceborne telescope with 3.5 m aperture[J].Chinese Optics, 2014, 7(4):532-541.(in Chinese) http://www.opticsjournal.net/Articles/Abstract?aid=OJ0818000452QnTpWs
[4]	石磊, 许永森, 刘福贺.光电系统中铍反射镜的发展与应用[J].中国光学, 2014, 7(5):749-758. http://www.chineseoptics.net.cn/EN/abstract/abstract9191.shtml SHI L, XU Y S, LIU F H.Development and application of beryllium mirrors in optical systems[J].Chinese Optics, 2014, 7(5):749-758.(in Chinese) http://www.chineseoptics.net.cn/EN/abstract/abstract9191.shtml
[5]	齐光, 王书新, 李景林.空间遥感器高体份SiC/Al复合材料反射镜组件设计[J].中国光学, 2015, 8(1):99-106. doi: 10.3788/co. QI G, WANG SH X, LI J L.Design of high volume fraction SiC/Al composite mirror in spape remote sensor[J].Chinese Optics, 2015, 8(1):99-106.(in Chinese) doi: 10.3788/co.
[6]	陈洪达, 陈永和, 史婷婷, 等.空间反射镜的轻量化及支撑设计研究[J].红外与激光工程, 2014, 43(2):535-540. http://www.cnki.com.cn/Article/CJFDTotal-HWYJ201402037.htm CHEN H D, CHEN Y H, SHI T T, et al..Lightweight and mounting design for primary mirror in space camera[J].Infrared and Laser Engineering, 2014, 43(2):535-540.(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-HWYJ201402037.htm
[7]	徐宏, 关英俊.大口径SiC轻量化反射镜组件的结构设计[J].红外与激光工程, 2014, 43(S1):83-88. http://www.cnki.com.cn/Article/CJFDTotal-HWYJ201402037.htm XU H, GUAN Y J.Structural design of large aperture SiC mirror subassembly[J].Infrared and Laser Engineering, 2014, 43(S1):83-88.(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-HWYJ201402037.htm
[8]	BLOEMHOF E E, LAM J C, FERIA V A, et al..Extracting the zero-gravity surface figure of a mirror[J].SPIE, 2008, 7013:70133L_1-70133L_12. http://adsabs.harvard.edu/abs/2008SPIE.7013E..3LB
[9]	戴斌飞.面形精度评价方法研究[D].苏州:苏州大学, 2005. http://cdmd.cnki.com.cn/article/cdmd-10285-2005135581.htm
[10]	SCHWERTZ K, Burge J H.Field Guide to Optomechanical Design and Analysis[M].Bellingham:SPIE Press, 2012:83.
[11]	陈华.高精度面形检测中环境扰动因素分析[D].长春:中科院长春光学精密机械与物理研究所, 2011. http://cdmd.cnki.com.cn/Article/CDMD-80139-1012291449.htm
[12]	于涛, 王永成, 代霜, 等.基于温度水平的空间相机主动热控系统[J].红外与激光工程, 2015, 44(1):249-253. http://www.cnki.com.cn/article/cjfdtotal-hwyj201501043.htm YU T, WANG Y CH, DAI SH, et al..Active thermal control system for space camera based on temperature level[J].Infrared and Laser Engineering, 2015, 44(1):249-253.(in Chinese) http://www.cnki.com.cn/article/cjfdtotal-hwyj201501043.htm
[13]	任建岳, 陈长征, 何斌, 等.SiC和SiC/Al在TMA空间遥感器中的应用[J].光学精密工程, 2008, 16(12):2537-2543. http://www.cnki.com.cn/Article/CJFDTotal-GXJM200812043.htm REN J Y, CHEN CH ZH, HE B, et al..Application of SiC and SiC/Al to TMA optical remote sensor[J].Opt.Precision Eng., 2008, 16(12):2537-2543.(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-GXJM200812043.htm
[14]	康健, 宣斌, 谢京江.表面改性碳化硅基底反射镜加工技术现状[J].中国光学, 2013(6):824-833. KANG J, XUAN B, XIE J J.Manufacture technology status of surface modified silicon carbide mirrors[J].Chinese Optics, 2013(6):824-833.(in Chinese)
[15]	赵汝成, 包建勋.大口径轻质SiC反射镜的研究与应用[J].中国光学, 2014, 7(4):552-558. http://www.chineseoptics.net.cn/CN/abstract/abstract9163.shtml ZHAO R CH, BAO J X.Investigation and application of large scale lightweight SiC mirror[J].Chinese Optics, 2014, 7(4):552-558.(in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract9163.shtml
[16]	齐光, 许艳军, 刘炳强.空间相机反射镜SiC/Al支撑板轻量化结构优化设计[J].红外与激光工程, 2014, 43(7):2214-2218. http://www.cnki.com.cn/Article/CJFDTotal-HWYJ201407032.htm QI G, XU Y J, LIU B Q.Lightweight structure design for SiC/Al supporting plate of space mirror[J].Infrared and Laser Engineering, 2014, 43(7):2214-2218.(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-HWYJ201407032.htm
[17]	伞兵, 李景林, 孙斌.空间相机大口径反射镜轻量化技术及应用[J].红外与激光工程, 2015, 44(10):3043-3048. http://www.cnki.com.cn/Article/CJFDTotal-HWYJ201510031.htm SAN B, LI J L, SUN B.Light-weight technology and its application of large-aperture mirror in space camera[J].Infrared and Laser Engineering, 2015, 44(10):3043-3048.(in Chinese) http://www.cnki.com.cn/Article/CJFDTotal-HWYJ201510031.htm