空间臂式补偿机构轴承预紧力与系统刚度关系分析

王智; 郭万存

doi:10.3788/CO.20140706.0989

Volume 7 Issue 6

Nov. 2014

Turn off MathJax

Article Contents

Chinese Optics > 2014 > 7(6): 989-995.

WANG Zhi, GUO Wan-cun. Analysis on the relationship between bearing preload of spatial arm compensation mechanism and system stiffness[J]. Chinese Optics, 2014, 7(6): 989-995. doi: 10.3788/CO.20140706.0989

Citation:

WANG Zhi, GUO Wan-cun. Analysis on the relationship between bearing preload of spatial arm compensation mechanism and system stiffness[J]. Chinese Optics, 2014, 7(6): 989-995. doi: 10.3788/CO.20140706.0989

Citation:

PDF( 867 KB)

Analysis on the relationship between bearing preload of spatial arm compensation mechanism and system stiffness

doi: 10.3788/CO.20140706.0989

Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033, China

Received Date: 18 Sep 2014
Rev Recd Date: 17 Nov 2014
Publish Date: 25 Nov 2014

Abstract

Abstract

When the spatial telescope tracks the target on the orbit, move and rotation will occurr between the visual axis of the telescope and target(namely pointing deviation and oscillation) due to all kinds of factors in space. In order to compensate above errors, the arm compensation mechanism is designed to compensate the errors between the visual axis and the target. Because the size and weight of the arm compensation mechanism are restricted severely, and the size of the telescope is huge and its weight is more than 3 000 kg, this configuration results in lower stiffness of the system. In order to satisfy higher machinery stiffness required by the control system, the feasibility is analyzed to improve system stiffness through forcing preload on bearing after the system configuration is confirmed. This paper studies on the relationship among bearing preload, bearing stiffness and system stiffness, and the relationship curve between bearing preload and system natural frequency is obtained. The analysis proves that forcing an appropriate preload to bearing can improve system stiffness on the condition that the system configuration is confirmed, and it is also an effective method to confirm the optimum bearing preload.
- arm compensation mechanism,
- bearing,
- preload,
- stiffness

FullText(HTML)

References(1)

References

[1] 韩德一,梁波. 惯性平台轴承预紧力及其刚度的计算分析[J]. 中国惯性技术学报,1998,6(4):38-60. HAN D Y,LIANG B. Analysis and computation on the preloaded force and stiffness of bearing fixed in the inertial platform[J]. J. Chinese Inertial Technology,1998,6(4):38-60.(in Chinese)
[2] ZVERV I,PYOUN Y S,LEE K B,et al.. An elastic deformation model of high speed spindles built into ball bearings[J]. J. Materials Processing Technology,2005,170(3):570-578.
[3] ALASRY A,ABEDI H. Kinematic and dynamic sensitivity analysis of a three-axis rotary table[J]. IEEE,2003 2:1147-1152.
[4] ALFARES M A,ELSHARKAWY A A. Effects of axial preloading of angular contact ball bearings on the dynamics of a grinding machine spindle system[J]. J. Materials Processing Technology,2003,136(1-3):48-59.
[5] 李朝辉,陈波. 月基对地观测跟踪转台设计与分析[J]. 光子学报,2010,39(12):2215-2219. LI ZH H,CHEN B. Development of lunar pointing mounts for imaging to the earth[J]. Acta Photonica Sinica,2010,39(12),2215-2219.(in Chinese)
[6] 王智,李朝辉. 月基极紫外相机光机结构设计[J]. 光学精密工程,2011,19(10):2427-2433. WANG ZH,LI ZH H. Optical-mechanical structure design for lunar-based extreme ultraviolet camera[J]. Opt. Precision Eng.,2011,19(10):2427-2433.(in Chinese)
[7] 王智. 基于碳纤维复合材料的月基极紫外相机照准架结构设计[J]. 中国光学,2012,5(6):590-595. WANG ZH. Design of CRFP collimation frame structure of lunar-based EUV camera[J]. Chinese Optics,2012,5(6):590-595.(in Chinese)
[8] 张景旭. 大型跟瞄架方位轴系的研制[J]. 光学精密工程,1996,4(2):73-77. ZHANG J X. Development of vertical axial system for large tracking and pointing mount[J]. Opt. Precision Eng.,1996,4(2):73-77.(in Chinese)
[9] 田学光,田兴志,刘轩,等. 大型精密转台高精度角度微驱动装置研制[J]. 光学精密工程,2010,18(5):1112-1118. TIAN X G,TIAN X ZH,LIU X,et al. Development of angular micro driving device for large-scale and high accurate turntable[J]. Opt. Precision Eng.,2010,18(5):1112-1118.(in Chinese)
[10] 李为民,王海涛. 轴向定位预紧轴承刚度计算[J]. 河北工业大学学报,2001,30(2):15-19. LI W M,WANG H T. Rigidity calculation of axial position preload bearings[J]. J. Hebei University of Technology,2001,30(2):15-19.(in Chinese)
[11] 郭向东,王燕霜. 轴承预紧力-系统固有频率及跨距关系的研究[J]. 轴承,2013,4:30-33. GUO X D,WANG Y SH. Research on relationship among bearing preload, system natural frequency and span[J]. Bearing,2013,4:30-33.(in Chinese)
[12] SHAN X B,XIE T,CHEN W SH. Novel approach for determining the optimal axial preload of a simulating rotary table spindle system[J]. J. Zhejiang University Science A,2007,8(5):812-817.