Volume 7 Issue 1
Jan.  2014
Turn off MathJax
Article Contents
CHEN Bao-gang, MING Ming, LYU Tian-yu. Precise measurement of curvature radius for spherical mirror with large aperture[J]. Chinese Optics, 2014, 7(1): 163-168. doi: 10.3788/CO.20140701.0163
Citation: CHEN Bao-gang, MING Ming, LYU Tian-yu. Precise measurement of curvature radius for spherical mirror with large aperture[J]. Chinese Optics, 2014, 7(1): 163-168. doi: 10.3788/CO.20140701.0163

Precise measurement of curvature radius for spherical mirror with large aperture

doi: 10.3788/CO.20140701.0163
  • Received Date: 14 Oct 2013
  • Rev Recd Date: 16 Dec 2013
  • Publish Date: 25 Jan 2014
  • Conventional testing methods for the curvature radius of spherical mirror with large aperture are introduced briefly, and a novel method using combined rods and laser interferometer is proposed. Firstly, the surface figure of spherical mirror is tested with laser interferometer. The position of interferometer and tested mirror is adjusted to make the focus of the exit wave front and the center of curvature of tested mirror to be confocal. Then the suitable combined rods are setup, and the position of probe spheric head which is close to interferometer is adjusted to make the focus of the exit wave front and the center of the probe spheric head con-focal. Next, another probe spheric head is adjusted to contact the surface of the tested mirror. The curvature radius of the spheric mirror can be calculated by the data. The basic principle of the testing method is analyzed. A telescope spheric primary mirror with a aperture of 600 mm is tested many times with this method. The average radius of curvature is calculated to be 2 836.774 mm,and the root mean square is 0.071 mm. Finally, the measurement uncertainty of this method is analyzed, and the main factors affecting the measurement accuracy are found out, and the composed standard uncertainty is 0.061 mm.

     

  • loading
  • [1] 杨李茗, 叶海仙. 大口径大曲率半径光学元件的高精度检测[J]. 光学 精密工程, 2011, 19(6):1207-1212. YANG L M, YE H X. High-precision metrology for optical components with large-apertures and large radii of curvature[J]. Opt. Precision Eng., 2011, 19(6):1207-1212.(in Chinese) [2] YE H X, YANG L M. Accuracy and analysis of long-radius measurement with long trace profiler[J]. Chinese Optics Lett., 2011, 9(10):102301. [3] 林旭东, 陈涛, 明名, 等. 球面拼接镜的相对曲率半径测量[J]. 光学 精密工程, 2010, 18(1):75-82. LIN X D, CHEN T, MING M, et al.. Measurement of relative curvature radius for spherical segmented mirrors[J]. Opt. Precision Eng., 2010, 18(1):75-82.(in Chinese) [4] 贾立德, 王家伍, 郑子文, 等. 光学非球面形摆臂式轮廓法测量顶点曲率半径优化算法研究[J]. 仪器仪表学报, 2009, 30(9):1996-2000. JIA L D, WANG J W, ZHENG Z W, et al.. Optimization algorithm for the measurement of vertex radius of aspherics with a swing-arm profilometer[J]. Chinese J.Scientific Instrument, 2009, 30(9):1996-2000.(in Chinese) [5] MALACARA D. Optical Shop Testing[M]. New York:John Wiley&Sons, 1992. [6] 王青, 徐新华. 干涉仪测量球面曲率半径的精度分析[J]. 东南大学学报, 2009, 39(11):55-59. WANG Q, XU X H. Precision analysis of measurement radius of curvature by interferometer[J]. J. Southeast University, 2009, 39(11):55-59.(in Chinese) [7] 孙若端, 邱丽荣, 杨佳苗, 等. 激光差动共焦曲率半径测量系统的研制[J]. 仪器仪表学报, 2011, 32(12):2833-2838. SUN R D, QIU L R, YANG J M, et al.. Development of laser differential confocal radius measurement system[J]. Chinese J. Scientific Instrument, 2011, 32(12):2833-2838(in Chinese). [8] ZHAO W, SHU R, QIU R, et al.. Laser differential confocal radius measurement[J]. Optics Express, 2010, 18(3):2345-2360. [9] 王孝坤, 郑立功. 一种精确测量光学球面曲率半径的方法[J]. 光学学报, 2011, 31(8):0812010. WANG X K, ZHENG L G. A method for testing radius of curvature of optical spheric surface[J]. Acta Optica Sinica, 2011, 31(8):0812010.(in Chinese) [10] 陈宝刚, 王建立, 杨飞, 等. 一种测量球面反射镜曲率半径的装置与方法:中国, CN 101825446 B[P], 2011-12-28. CHEN B G, WANG J L, YANG F. An equipment and method for measuring radius of curvature of spheric reflected mirror:China, CN 101825446 B, 2011-12-28.(in Chinese) [11] 中国机械工业联合会.GB/T 8177-2004两点内径千分尺[S].北京:中国标准出版社, 2004. China Machinery Industry Federation. GB/T 8177-2004. Internal micrometers with two-point contact[S]. Beijing:China Standards Press, 2004.(in Chinese) [12] 明名, 吕天宇, 邵亮, 等. 利用Offner光学系统进行图像恢复和光学检测[J]. 中国光学, 2012, 5(6):646-651. MING M, LV T Y, SHAO L, et al.. Image restoration and optical test by using Offner optical system[J]. Chinese Optics, 2012, 5(6):646-651.(in Chinese) [13] 国家质量监督检验检疫总局.JJG 22-2003内径千分尺检定规程[S].北京:中国计量出版社, 2003. State Administration for Quality Supervision and Inspection and Quarantine. JJG 22-2003 Verification regulation of internal micrometers[S]. Beijing:China Metrology Press, 2003.(in Chinese) [14] 费业泰.误差理论与数据处理[M]. 北京:机械工业出版社, 2005:82-93. FEI Y T. Error theory and Data Processing[M]. Beijing:China Machine Press, 2005:82-93.(in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Article views(1954) PDF downloads(872) Cited by()
    Proportional views

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return