Influence of tangential airflows on burn-through effect with no-melting of metal heated by laser

[1] BOLEY C D,RUBENCHIK A M. Modeling of high-energy pulsed laser interactions with coupons,UCRL-ID-151857. U.S.Department of Energy,2003. [2] ABBOTT R P,BOLEY C D,FOCHS S N,et al.. High-power solid-state laser lethality testing and modeling,FL,UCRL-JRNL-234510. 25th Annual Army Science Conference Orlando,2006. [3] BOLEY C D,FOCHS S N,RUBENCHIK A M. Lethality of a high-power solid-state laser,NM,UCRL-JRNL-234510. Ninth Annual Directed Energy Symposium, Albuquerque,2006. [4] BOLEY C D,RUBENCHIK A M. Modeling of laser-induced metal combustion,CA,LLNL-CONF-401854. 5th Annual High Energy Laser Lethality Conference Monterey,2008. [5] BOLEY C D,FOCHS S N,RUBENCHIK A M. Large-spot material interactions with a high-power solid-state laser beam,UCRL-JRNL-406423 [R]. Journal of Directed Energy,2008. [6] BOLEY C D,CUTTER K P,FOCHS S N,et al,Study of laser interaction with thin targets,CA,LLNL-PROC-411215 [R]. Sixth Annual High Energy Laser Lethality Conference Monterey,2009. [7] 刘峰,吴振森,王玉恒. 重复频率激光辐照柱壳的加热效率[J]. 中国激光,2006,33(4):461-466 LIU F,WU ZH S,WANG Y H. The heating efficiency of a RF intensity laser-irradiated Cylinder[J]. Chinese J. Lasers,2006,33(4):461-466.(in Chinese) [8] 吴克跃;宋 军;吴兴举. 激光辐照和高温氧化硅锗合金的低维结构和发光特性[J]. 发光学报,2009,30(4):541-544. WU K Y,SONG J,WU X J. The low-dimensional structure and luminescence of nano sige alloy formed by laser irradiation and high temperature oxidation[J]. Chinese J. Luminescence,2009,30(4):541-544.(in Chinese) [9] 金方圆,鄂书林,王海峰,等. 短脉冲激光加工双温方程的优化运算[J]. 发光学报,2012,(10):1143-1148. JIN F Y,E SH L,WANG H F,et al., Calculation of an optimized two temperature model for ultra-short laser ablation[J]. Chinese J. Luminescence,2012,(10):1143-1148.(in Chinese) [10] 刘剑,陆建,倪晓武,等. 单晶硅片在脉冲激光作用下的断裂行为[J]. 光学 精密工程,2011,19(2):414-420. LIU J,LU J,NI X W,et al.. Fracture behavior during pulsed laser irradiating silicon wafer[J]. Opt. Precision Eng.,2011,19(2):414-420.(in Chinese) [11] 刘峰,陈雨生,吴振森. 基于充压柱壳损伤形态的靶面激光参数估计[J]. 中国激光,2007,34(6):797-803. LIU F,CHEN Y SH,WU ZH S. Estimation of laser beam-parameters based on damage configuration of a cylindrical shell subjected to internal pressure[J]. Chinese J. Lasers,2007,34 (6):797-803.(in Chinese) [12] 陈敏孙, 江厚满. 切向空气气流对激光烧蚀碳纤维复合材料过程的影响[J]. 光学 精密工程,2011,19(2):482-486. CHEN M S,JIANG H M. Influence of tangential airflows on process of laser ablating carbon-fiber composites[J]. Opt. Precision Eng.,2011,19(2):482-486.(in Chinese) [13] 徐秉业,刘信声.应用弹塑性力学[M]. 北京:清华大学出版社,1995. XU B Y,LIU X SH. Applied Elastic-plastic Mechanics[M]. Beijing:Tsinghua University Press,1995.(in Chinese) [14] 吴连元编著.板壳理论[M]. 上海:上海交通大学出版社,1989. WU L Y. Theory of Plates and Shells[M]. Shanghai:Shanghai Jiaotong University Press,1989.(in Chinese) [15] TIMOSHENKO S,WOINOWSKY-KRIEGER S. Theory of Plates and Shells[M]. 2nd ed. New York:McGraw-Hill Book Company,Inc.,1959. [16] Departments and Agencies of the Department of Defense and the Federal Aviation Administration Metallic Materials and Elements for Aerospace Vehicle Structures,MIL-HDBK-5J [EB/OL].(1998-12-01) [2013-02-11].http://www.doc88.com/p-982701688821.html.2003. [17] 黄伯云,李成功,石力开,等.中国材料工程大典:有色金属材料工程[M]. 北京:化学工业出版社,2006. HUANG B Y,LI CH G,SH L K,et al.. China Materials Engineering Canon:Non-ferrous Metal Materials Engineering[M]. Beijing:China Chemistry Industry Press,2006.(in Chinese) [18] 干勇,田志凌,董瀚,等.中国材料工程大典:钢铁材料工程[M]. 北京:化学工业出版社,2006. GAN Y,TIAN ZH L,DONG H. China Materials Engineering Canon:Iron and Steel Materials Engineering[M]. Beijing:China Chemistry Industry Press,2006.(in Chinese)