留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

弹性发射光学制造技术研究进展

李佳慧 侯溪 张云 王佳 钟显云

李佳慧, 侯溪, 张云, 王佳, 钟显云. 弹性发射光学制造技术研究进展[J]. 中国光学(中英文), 2021, 14(5): 1089-1103. doi: 10.37188/CO.2021-0022
引用本文: 李佳慧, 侯溪, 张云, 王佳, 钟显云. 弹性发射光学制造技术研究进展[J]. 中国光学(中英文), 2021, 14(5): 1089-1103. doi: 10.37188/CO.2021-0022
LI Jia-hui, HOU Xi, ZHANG Yun, WANG Jia, ZHONG Xian-yun. Research progress of elastic emission machining in optical manufacturing[J]. Chinese Optics, 2021, 14(5): 1089-1103. doi: 10.37188/CO.2021-0022
Citation: LI Jia-hui, HOU Xi, ZHANG Yun, WANG Jia, ZHONG Xian-yun. Research progress of elastic emission machining in optical manufacturing[J]. Chinese Optics, 2021, 14(5): 1089-1103. doi: 10.37188/CO.2021-0022

弹性发射光学制造技术研究进展

doi: 10.37188/CO.2021-0022
基金项目: 中国科学院“西部青年学者”
详细信息
    作者简介:

    李佳慧(1996—),女,河北河间人,博士研究生,2019年于河北大学获得学士学位,主要从事超精密光学元件制造技术及工艺研究。Email:lijiahui_ioe@163.com

    侯 溪(1980—),男,四川阆中人,博士,研究员,博士生导师,2002 年于电子科技大学获得学士学位,2007 年于中国科学院研究生院获得博士学位,主要从事超精密光学制造及高精度光学检测技术研究。Email:hxxh6776@163.com

    张 云(1987—),男,四川古蔺人,博士,副研究员,硕士生导师,2010年、2016年于北京理工大学分别获得学士、博士学位,主要从事超精密光学元件制造技术及工艺研究。Email:yun5337@163.com

    王 佳(1987—),男,四川彭州人,博士,副研究员,硕士生导师,2010年于西北工业大学获得学士学位,2015年于中国科学院研究生院获得博士学位,主要从事超高精度非球面确定性加工工艺、装备研发及全频段误差加工分配、表征研究。Email:Wangj062778@qq.com

    钟显云(1986—),男,海南万宁人,博士,副研究员,硕士生导师,2010年于北京理工大学获得硕士学位,2021年于中国科学院光电技术研究所获得博士学位,主要从事超精密光学元件制造技术及亚表面破坏层控制工艺研究。Email:Kktongvip@163.com

  • 中图分类号: TG356.28

Research progress of elastic emission machining in optical manufacturing

Funds: Supported by the “Young Scholars of Western China” of the Chinese Academy of Sciences
More Information
  • 摘要: 深紫外光刻、极紫外光刻和先进光源等现代光学工程需求牵引先进光学制造技术持续发展,要求超光滑光学元件表面粗糙度达到原子级水平以及表面全频段面形误差达到RMS(Root Mean Square)亚纳米量级甚至几十皮米,推动超光滑光学元件制造要求不断逼近物理极限。目前,对于如何实现上述超高精度要求的超光滑加工技术及装备仍然存在技术挑战。尤其对如何实现柱面,椭球面,超环面等复杂曲面的原子量级超光滑加工仍是国内外前沿研究方向。弹性发射加工技术是一种去除函数稳定,超低亚表面缺陷,面向原子级的超光滑加工方法,可以作为加工上述精度要求光学元件的手段。本文总结了弹性发射加工技术的国内外研究现状及最新进展,归纳了弹性发射加工技术的原理,包含流体特性、抛光颗粒运动特性和化学特性,弹性发射加工装备,影响弹性发射加工技术表面粗糙度提升和材料去除效率的因素,分析了弹性发射加工技术面临的问题,展望了未来的发展方向,期望为弹性发射加工技术进一步发展和应用提供一定的参考。

     

  • 图 1  EEM基本原理

    Figure 1.  The basic principle of EEM

    图 2  抛光颗粒受力分析图

    Figure 2.  Force analysis diagram of polishing particles

    图 3  抛光颗粒作用数目、动能、动能密度分布图[26]

    Figure 3.  The number, kinetic energy, kinetic energy density distributions of polishing particles[26]

    图 4  材料去除量[27]

    Figure 4.  Material removal depth[27]

    图 5  纳米抛光颗粒与光学元件的相互作用示意图[30]

    Figure 5.  Interactions between surfaces of nano polishing particles and workpiece[30]

    图 6  分子动力学模拟结构的原子区域[32]

    Figure 6.  Region of atoms which is structurally optimized by molecular dynamics[32]

    图 7  弹性发射加工装置的发展历程[11, 31, 36-42]

    Figure 7.  The development of apparatus in EEM[11, 31, 36-42]

    图 8  影响加工表面粗糙度提升的因素[11, 26, 28, 44-47]

    Figure 8.  Factors affecting the improvement of surface roughness in EEM[11, 26, 28, 44-47]

    图 9  光学元件旋转式EEM[28]

    Figure 9.  Workpiece rotating type EEM[28]

    图 10  双转轮式EEM加工装置[44]

    Figure 10.  Illustration of dual-rotor type EEM[44]

    图 11  弹性发射加工装备

    Figure 11.  EEM system equipment

    表  1  弹性发射加工技术流体驱动方式[9, 19, 26, 43, 44]

    Table  1.   Fluid-driven methods of elastic emission machining[9, 19, 26, 43, 44]

    CategoryPolishing tool formAdvantage ■ and Disadvantage ●
    Polishing ball type EEMSpherical■ It can polish curved optical components.
    ● It has a low material removal rate and has
    side leakage.
    Ellipsoid■ Enlarge the interaction area and material
    removal rate.
    ■ The curvature of the tool will change, and
    the curved surface can be processed, which is
    more suitable for concave components.
    Polishing wheel type EEMCylindrical■ Expand the processing area, improve the
    material removal rate and there is no side
    leakage.
    ■ The removal function is linear, and only
    planes and cylinders with a single curvature
    can be processed.
    Spherical crown■ It can polish curved optical components.
    Nozzle type EEM■ It is easy to control and can accurately
    polish optical components.
    ■ It is not constrained by the shape of optical
    components.
    下载: 导出CSV

    表  2  用不同形状的抛光颗粒加工光学表面前后的表面质量和材料去除效率[51]

    Table  2.   Surface quality and material removal rate of preprocessed and EEM processed surfaces for polishing particles with different shapes[51]

    Preprocessed surfaceProcessed using spherical particlesProcessed using
    agglomerated
    particles
    P-V/nm2.2860.93601.412
    RMS/nm0.19400.09800.1410
    Material removal rate/(nm·h−1)1.000120.00
    下载: 导出CSV

    表  3  影响剪切力的因素

    Table  3.   Factors affecting shear stress in EEM

    Parameter typesFactors
    Processing parametersLiquid film thickness. Applied load
    Polishing fluid parametersThe size, surface morphology, lattice orientation
    and incident angle of polishing particles.
    Ultrapure water temperature.
    The viscosity and concentration of polishing fluid
    Polishing tool parametersThe shape, curvature, speed, surface roughness,
    material elastic modulus of polishing tool
    Optical component parametersThe material, lattice orientation,
    surface roughness, ripple, geometric
    parameters of optical components
    下载: 导出CSV

    表  4  参数与剪切力在不同状态下的关系

    Table  4.   The relationship of parameters with shear stress in different conditions

    IRIEVE
    Polishing tool rotationNegativePositivePositive
    Polishing fluid viscosityNegativePositivePositive
    Pressure-viscosity coefficientNegative
    Elastic modulusPositivePositive
    Polishing tool radiusPositivePositivePositive
    LoadPositivePositivePositive
    下载: 导出CSV

    表  5  弹性发射加工技术在表面粗糙度和材料去除效率方面的研究现状[10, 12, 14, 24, 45, 51, 55]

    Table  5.   Research status of surface roughness and material removal rates in EEM[10, 12, 14, 24, 45, 51, 55]

    MaterialSurface roughness(RMS)Material removal rate
    Si0.080 nm120 nm/h
    Zerodur0.085 nm1.25×10−3 mm3/h
    4H-SiC0.089 nm
    SiC0.640 nm
    Fused silica0.085 nm
    下载: 导出CSV
  • [1] YUMOTO H, KOYAMA T, MATSUYAMA S, et al. Ultra-high-precision surface processing techniques for nanofocusing ellipsoidal mirrors in hard X-ray region[J]. Proceedings of SPIE, 2014, 9206: 920605.
    [2] TAKEI Y, KUME T, MOTOYAMA H, et al. Development of a numerically controlled elastic emission machining system for fabricating mandrels of ellipsoidal focusing mirrors used in soft x-ray microscopy[J]. Proceedings of SPIE, 2013, 8848: 88480C.
    [3] YUMOTO H, KOYAMA T, MATSUYAMA S, et al. Ellipsoidal mirror for two-dimensional 100-nm focusing in hard X-ray region[J]. Scientific Reports, 2017, 7: 16408. doi: 10.1038/s41598-017-16468-1
    [4] 赵晨行, 卢启鹏, 宋源, 等. 自由电子激光光束线反射镜无应力夹持设计与分析[J]. 中国光学,2020,13(4):787-794. doi: 10.37188/CO.2019-0131

    ZHAO CH X, LU Q P, SONG Y, et al. Design and analysis of stress-free clamping of mirrors used in free-electron laser beamlines[J]. Chinese Optics, 2020, 13(4): 787-794. (in Chinese) doi: 10.37188/CO.2019-0131
    [5] SIEWERT F, BUCHHEIM J, GWALT G, et al. On the characterization of a 1 m long, ultra-precise KB-focusing mirror pair for European XFEL by means of slope measuring deflectometry[J]. Review of Scientific Instruments, 2019, 90(2): 021713. doi: 10.1063/1.5065473
    [6] WEISER M. Ion beam figuring for lithography optics[J]. Nuclear Instruments and Methods in Physics Research Section B:Beam Interactions with Materials and Atoms, 2009, 267(8-9): 1390-1393. doi: 10.1016/j.nimb.2009.01.051
    [7] LIN B, JIANG X M, CAO ZH CH, et al. Novel disc hydrodynamic polishing process and tool for high-efficiency polishing of ultra-smooth surfaces[J]. Micromachines, 2018, 9(7): 333. doi: 10.3390/mi9070333
    [8] 袁巨龙, 吴喆, 吕冰海, 等. 非球面超精密抛光技术研究现状[J]. 机械工程学报,2012,48(23):167-177. doi: 10.3901/JME.2012.23.167

    YUAN J L, WU ZH, LÜ B H, et al. Review on ultra-precision polishing technology of aspheric surface[J]. Journal of Mechanical Engineering, 2012, 48(23): 167-177. (in Chinese) doi: 10.3901/JME.2012.23.167
    [9] YAMAMURA K, MIMURA H, YAMAUCHI K, et al. Aspheric surface fabrication in nm-level accuracy by numerically controlled plasma chemical vaporization machining (CVM) and elastic emission machining (EEM)[J]. Proceedings of SPIE, 2002, 4782: 265-270. doi: 10.1117/12.453749
    [10] KANAOKA M, TAKINO H, NOMURA K, et al. Removal properties of low-thermal-expansion materials with rotating-sphere elastic emission machining[J]. Science and Technology of Advanced Materials, 2007, 8(3): 170-172. doi: 10.1016/j.stam.2006.12.003
    [11] 彭文强. 基于材料弹性域去除的超光滑表面加工关键技术研究[D]. 长沙: 国防科学技术大学, 2014.

    PENG W Q. Study on the key technology of ultrasmooth surface fabrication based on the material removal in elastic mode[D]. Changsha: Graduate School of National University of Defense Technology, 2014. (in Chinese)
    [12] KUBOTA A, SHINBAYASHI Y, MIMURA H, et al. Investigation of the surface removal process of silicon carbide in elastic emission machining[J]. Journal of Electronic Materials, 2007, 36(1): 92-97. doi: 10.1007/s11664-006-0006-3
    [13] PENG W Q, LI SH Y, GUAN CH L, et al. Improvement of magnetorheological finishing surface quality by nanoparticle jet polishing[J]. Optical Engineering, 2013, 52(4): 043401. doi: 10.1117/1.OE.52.4.043401
    [14] KUBOTA A, MIMURA H, INAGAKI K, et al. Preparation of ultrasmooth and defect-free 4H-SiC(0001) surfaces by elastic emission machining[J]. Journal of Electronic Materials, 2005, 34(4): 439-443. doi: 10.1007/s11664-005-0124-3
    [15] HIRATA T, TAKEI Y, MIMURA H. Machining property in smoothing of steeply curved surfaces by elastic emission machining[J]. Procedia CIRP, 2014, 13: 198-202. doi: 10.1016/j.procir.2014.04.034
    [16] SIDPARA A. Elastic Emission Machining[M]. Boca Raton: CRC Press, 2017.
    [17] MORI Y, TSUWA H, SUGIYAMA K. EEM (Elastic Emission Machining) (1st Report): concept of EEM and its feasibility[J]. Journal of the Japan Society of Precision Engineering, 1977, 43(509): 542-548. doi: 10.2493/jjspe1933.43.542
    [18] TURNER T. Superpolished optics enable high-sensitivity laser applications[EB/OL]. https://www.photonics.com/Articles/Superpolished_Optics_Enable_High-Sensitivity/a52258.
    [19] KIM J D. Motion analysis of powder particles in EEM using cylindrical polyurethane wheel[J]. International Journal of Machine Tools and Manufacture, 2002, 42(1): 21-28. doi: 10.1016/S0890-6955(01)00095-5
    [20] MORI Y, IKAWA N, OKUDA T, et al. Numerically controlled elastic emission machining: motion analysis of fluid and distribution of film thickness[J]. Journal of the Japan Society of Precision Engineering, 1983, 49(11): 1540-1548. doi: 10.2493/jjspe1933.49.1540
    [21] ZHANG L H, WANG J L, ZHANG J. Super-smooth surface fabrication technique and experimental research[J]. Applied Optics, 2012, 51(27): 6612-6617. doi: 10.1364/AO.51.006612
    [22] CAO ZH CH, LIN B, JIANG X M, et al. Flow field analysis of the thin fluid film in disc hydrodynamic polishing[J]. Procedia CIRP, 2018, 77: 363-366. doi: 10.1016/j.procir.2018.09.036
    [23] KANAOKA M, TAKINO H, NOMURA K, et al.. Factors affecting changes in removal rate of elastic emission machining[C]. Proceedings of ASPE 2008 Annual Meeting and the Twelfth ICPE, 2008: 615-618.
    [24] KANAOKA M, LIU CH L, NOMURA K, et al. Processing efficiency of elastic emission machining for low-thermal-expansion material[J]. Surface and Interface Analysis, 2008, 40(6-7): 1002-1006. doi: 10.1002/sia.2818
    [25] 徐兴芹. 弹性发射加工中磨粒群运动特性的研究[D]. 大连: 大连理工大学, 2013.

    XU X Q. Study of behaviour of particle group movement in elastic emission machining[D]. Dalian: Dalian University of Technology, 2013. (in Chinese)
    [26] MORI Y. Elastic emission machining and its surface[J]. Journal of the Japan Society of Precision Engineering, 1980, 46(6): 659-666. doi: 10.2493/jjspe1933.46.659
    [27] MORI Y, OKUDA T, SUGIYAMA K, et al. Numerically controlled elastic emission machining: consideration of machining property by motion analysis of powder particle in fluid[J]. Journal of the Japan Society of Precision Engineering, 1985, 51(5): 1033-1039. doi: 10.2493/jjspe1933.51.1033
    [28] KANAOKA M, NOMURA K, YAMAUCHI K, et al.. Efficiency-enhanced elastic emission machining on the basis of processing mechanism[C]. Proceedings of the 12th Euspen International Conference, 2012: 193-196.
    [29] KANAOKA M, NOMURA K, YAMAUCHI K, et al. Powder particle behavior at the processing point of elastic emission machining[J]. The Proceedings of the Manufacturing &Machine Tool Conference, 2012, 9: 143-144.
    [30] YAMAUCHI K, HIROSE K, GOTO H, et al. First-principles simulations of removal process in EEM (Elastic Emission Machining)[J]. Computational Materials Science, 1999, 14(1-4): 232-235. doi: 10.1016/S0927-0256(98)00112-8
    [31] MORI Y, YAMAUCHI K, ENDO K. Elastic emission machining[J]. Precision Engineering, 1987, 9(3): 123-128. doi: 10.1016/0141-6359(87)90029-8
    [32] INAGAKI K, YAMAUCHI K, MIMURA H, et al. First-principles evaluations of machinability dependency on powder material in elastic emission machining[J]. Materials Transactions, 2001, 42(11): 2290-2294. doi: 10.2320/matertrans.42.2290
    [33] PENG W Q, GUAN CH L, LI SH Y. Efficient fabrication of ultrasmooth and defect-free quartz glass surface by hydrodynamic effect polishing combined with ion beam figuring[J]. Optics Express, 2014, 22(11): 13951-13961. doi: 10.1364/OE.22.013951
    [34] 宋孝宗. 纳米颗粒胶体射流抛光机理及试验研究[D]. 哈尔滨: 哈尔滨工业大学, 2010.

    SONG X Z. Research on mechanism and experiments of nanoparticle colloid jet polishing[D]. Harbin: Harbin Institute of Technology, 2010. (in Chinese)
    [35] PENG W Q, GUAN CH L, LI SH Y. Defect-free surface of quartz glass polished in elastic mode by chemical impact reaction[J]. Journal of Central South University, 2014, 21(12): 4438-4444. doi: 10.1007/s11771-014-2446-x
    [36] 何宗海, 赵永彬. JP-25型重力式平衡机原理——兼讨论十字弹簧特性[J]. 试验技术与试验机,1984(4):10-17, 72.

    HE Z H, ZHAO Y B. The principle of JP-25 gravity balancing machine-discussing the characteristics of cross spring[J]. Engineering and Testing, 1984(4): 10-17, 72. (in Chinese)
    [37] MORI Y. Polishing device: Japan, 62-088565A[P]. 1987-04-23.
    [38] MORI Y. Polishing device: Japan, 62-199353A[P]. 1987-09-03.
    [39] 张富. 弹性约束游离磨料超光滑表面加工技术的研究[D]. 长春: 吉林大学, 2007.

    ZHANG F. Study on elastically constrained and dissociated abrasive polishing for ultra-smooth surfaces[D]. Changchun: Jilin University, 2007. (in Chinese)
    [40] 朱崇涛. 液流悬浮超光滑加工机理及抛光动压力的研究[D]. 长春: 吉林大学, 2007.

    ZHU CH T. Study on principle of hydrodynamic suspension ultra-smooth machining and dynamic pressure of polishing[D]. Changchun: Jilin University, 2007. (in Chinese)
    [41] 张恩忠. 液流悬浮超光滑加工不同材料的对比研究[D]. 长春: 吉林大学, 2006.

    ZHANG E ZH. Contrastive investigation into hydrodynamic suspension ultra-smooth processing different material[D]. Changchun: Jilin University, 2006. (in Chinese)
    [42] WANG J L, WANG SH ZH, LIU J, et al.. Polishing device for fork type support: CN, WO2013091208A1[P]. 2013-06-27.
    [43] 王君, 金春水, 王丽萍, 等. 一种用于弹性发射加工的工具轮: 中国, 105563271A[P]. 2016-05-11.

    WANG J, JIN CH SH, WANG L P, et al.. Tool wheels used for elastic emission machining: CN, 105563271A[P]. 2016-05-11. (in Chinese)
    [44] 李庆宇. 基于流体动力润滑效应的双转弹性发射加工技术研究[D]. 长沙: 国防科学技术大学, 2015.

    LI Q Y. Study on the technology of elastic emission machining with dual-rotor based on hydrodynamic lubrication[D]. Changsha: Graduate School of National University of Defense Technology, 2015. (in Chinese)
    [45] MORI Y, YAMAUCHI Y, YAMAMURA K, et al. Development of plasma chemical vaporization machining and elastic emission machining systems for coherent X-ray optics[J]. Proceedings of SPIE, 2001, 4501: 30-42. doi: 10.1117/12.448496
    [46] YAMAUCHI K, KATAOKA T, ENDO K, et al. A study on EEM (Elastic Emission Machining): influences of dissolved oxygen to Si wafer surface[J]. Journal of the Japan Society for Precision Engineering, 1998, 64(6): 907-912. doi: 10.2493/jjspe.64.907
    [47] MORI Y, IKAWA N, SUGIYAMA K, et al. Elastic Emission Machining (2nd Report): stress field and feasibility of introduction and activation of lattice defect[J]. Journal of the Japan Society of Precision Engineering, 1985, 51(6): 1187-1194. doi: 10.2493/jjspe1933.51.1187
    [48] KUBOTA A, MIMURA H, INAGAKI K, et al. Morphological stability of Si(001) surface immersed in fluid mixture of ultrapure water and silica powder particles in elastic emission machining[J]. Japanese Journal of Applied Physics, 2005, 44(8R): 5893-5897.
    [49] 宋辞, 李圣怡, 李庆宇, 等. 一种用于获取超光滑表面的双转轮式弹性发射加工装置: 中国, 105345640A[P]. 2016-02-24.

    SONG C, LI SH Y, LI Q Y, et al.. Double-turning-wheel type elastic emission machining device used for obtaining super-smooth surface: CN, 105345640A[P]. 2016-02-24. (in Chinese)
    [50] SU Y T, WANG S Y, CHAO P Y, et al. Investigation of elastic emission machining process: lubrication effects[J]. Precision Engineering, 1995, 17(3): 164-172. doi: 10.1016/0141-6359(94)00014-Q
    [51] KUBOTA A, MIMURA H, INAGAKI K, et al. Effect of particle morphology on removal rate and surface topography in elastic emission machining[J]. Journal of the Electrochemical Society, 2006, 153(9): G874. doi: 10.1149/1.2220068
    [52] PENG W Q, GUAN CH L, LI SH Y. Ultrasmooth surface polishing based on the hydrodynamic effect[J]. Applied Optics, 2013, 52(25): 6411-6416. doi: 10.1364/AO.52.006411
    [53] 彭文强, 关朝亮, 胡旭东, 等. 流体动压超光滑加工关键工艺参数优化[J]. 国防科技大学学报,2017,39(4):179-184. doi: 10.11887/j.cn.201704028

    PENG W Q, GUAN CH L, HU X D, et al. Key process parameters optimization of hydrodynamic effect polishing[J]. Journal of National University of Defense Technology, 2017, 39(4): 179-184. (in Chinese) doi: 10.11887/j.cn.201704028
    [54] TAKEI Y, MIMURA H. Effect of focusing flow on stationary spot machining properties in elastic emission machining[J]. Nanoscale Research Letters, 2013, 8(1): 237. doi: 10.1186/1556-276X-8-237
    [55] TAKINO H, KANAOKA M, NOMURA K. Ultraprecision machining of optical surfaces[C]. Proceedings of International Symposium on Ultraprecision Engineering and Nanotechnology, 2011: 5-10.
    [56] OHASHI H, TSUMURA T, OKADA H, et al. Microstitching interferometer and relative angle determinable stitching interferometer for half-meter-long X-ray mirror[J]. Proceedings of SPIE, 2007, 6704: 670405. doi: 10.1117/12.733476
    [57] LAUNDY D, SAWHNEY K, NISTEA I, et al. Development of a multi-lane X-ray mirror providing variable beam sizes[J]. Review of Scientific Instruments, 2016, 87(5): 051802. doi: 10.1063/1.4950732
    [58] DA SILVA J C, PACUREANU A, YANG Y, et al. Efficient concentration of high-energy X-rays for diffraction-limited imaging resolution[J]. Optica, 2017, 4(5): 492-495. doi: 10.1364/OPTICA.4.000492
    [59] WEN M W, KOZHEVNIKOV I V, SIEWERT F, et al. Effect of the surface roughness on X-ray absorption by mirrors operating at extremely small grazing angles[J]. Optics Express, 2018, 26(16): 21003-21018. doi: 10.1364/OE.26.021003
    [60] YAMAUCHI K, YAMAMURA K, MIMURA H, et al. Two-dimensional submicron focusing of hard X-rays by two elliptical mirrors fabricated by plasma chemical vaporization machining and elastic emission machining[J]. Japanese Journal of Applied Physics, 2003, 42(11R): 7129-7134.
    [61] MORI Y, YAMAUCHI K, YAMAMURA K, et al. Fabrication technology of hard X-ray aspherical mirror optics and application to nanospectroscopy[J]. Proceedings of SPIE, 2004, 5193: 11-17. doi: 10.1117/12.515127
    [62] YAMAUCHI K, YAMAMURA K, MIMURA H, et al. Fabrication technology of ultraprecise mirror optics to realize hard X-ray nanobeam[J]. Proceedings of SPIE, 2004, 5533: 116-123. doi: 10.1117/12.567501
    [63] MIMURA H, YUMOTO H, MATSUYAMA S, et al. Surface figuring and measurement methods with spatial resolution close to 0.1 mm for X-ray mirror fabrication[J]. Proceedings of SPIE, 2005, 5921: 59210M. doi: 10.1117/12.623103
    [64] YUMOTO H, MIMURA H, KOYAMA T, et al. Focusing of X-ray free-electron laser pulses with reflective optics[J]. Nature Photonics, 2013, 7(1): 43-47. doi: 10.1038/nphoton.2012.306
    [65] TAKEI Y, MIMURA H. Development of surface profiler for master mandrel of X-ray ellipsoidal mirror[J]. Proceedings of SPIE, 2016, 9962: 99620C.
    [66] MATSUYAMA S, YASUDA S, YAMADA J, et al. 50-nm-resolution full-field X-ray microscope without chromatic aberration using total-reflection imaging mirrors[J]. Scientific Reports, 2017, 7: 46358. doi: 10.1038/srep46358
    [67] 张帅, 侯溪. K-B镜面形高精度检测技术研究进展[J]. 中国光学,2020,13(4):660-675. doi: 10.37188/CO.2019-0231

    ZHANG SH, HOU X. Research progress of high-precision surface metrology of a K-B mirror[J]. Chinese Optics, 2020, 13(4): 660-675. (in Chinese) doi: 10.37188/CO.2019-0231
    [68] KANAOKA M, HIGUCHI T, YAMAMOTO T, et al.. Ultra-precision surface polishing technologies achieved in the field of ultraviolet optics[C]. Optical Design and Fabrication 2017, Optical Society of America, 2017.
    [69] MURAKAMI K, OSHINO T, KONDO H, et al. Development progress of optics for extreme ultraviolet lithography at Nikon[J]. Journal of Micro/Nanolithography,MEMS,and MOEMS, 2009, 8(4): 041507. doi: 10.1117/1.3238522
  • 加载中
图(11) / 表(5)
计量
  • 文章访问数:  2146
  • HTML全文浏览量:  957
  • PDF下载量:  318
  • 被引次数: 0
出版历程
  • 收稿日期:  2021-01-22
  • 修回日期:  2021-02-22
  • 网络出版日期:  2021-07-02
  • 刊出日期:  2021-09-18

目录

    /

    返回文章
    返回

    重要通知

    2024年2月16日科睿唯安通过Blog宣布,2024年将要发布的JCR2023中,229个自然科学和社会科学学科将SCI/SSCI和ESCI期刊一起进行排名!《中国光学(中英文)》作为ESCI期刊将与全球SCI期刊共同排名!