留言板

尊敬的读者、作者、审稿人, 关于本刊的投稿、审稿、编辑和出版的任何问题, 您可以本页添加留言。我们将尽快给您答复。谢谢您的支持!

姓名
邮箱
手机号码
标题
留言内容
验证码

二氧化碳探测仪典型透镜支撑结构的设计及分析

梁彪 刘伟

梁彪, 刘伟. 二氧化碳探测仪典型透镜支撑结构的设计及分析[J]. 中国光学(中英文), 2011, 4(4): 388-396.
引用本文: 梁彪, 刘伟. 二氧化碳探测仪典型透镜支撑结构的设计及分析[J]. 中国光学(中英文), 2011, 4(4): 388-396.
LIANG Biao, LIU Wei. Design and analysis of support structure for typical lens of carbon dioxide detector[J]. Chinese Optics, 2011, 4(4): 388-396.
Citation: LIANG Biao, LIU Wei. Design and analysis of support structure for typical lens of carbon dioxide detector[J]. Chinese Optics, 2011, 4(4): 388-396.

二氧化碳探测仪典型透镜支撑结构的设计及分析

基金项目: 

国家863高技术研究发展计划资助项目(No.2010AA1221091001)

详细信息
  • 中图分类号: TH744.1; X851

Design and analysis of support structure for typical lens of carbon dioxide detector

More Information
    Author Bio:

    LIU Wei(1967-), male, from Jilin province, senior engineer, supervisor of master students, is specialized in fine mechanics design. E-mail:2400liuwei@163.com

  • 摘要: 为了降低外界载荷和温度变化对二氧化碳探测仪光学系统透镜面形及共轴的影响,根据系统的特点和技术要求,对其典型透镜的支撑结构进行了研究,设计了一种径向挠性支撑结构并建立了3D实体模型。运用工程CAD分析软件,采用非线性有限元分析方法对其进行了动静刚度特性和热特性仿真分析,验证了支撑结构设计的合理性。分析结果表明,透镜结构组件的一阶固有频率为1 301 Hz;利用面型拟合,得到了各工况下镜面面形误差值为PV/10,RMS/50,偏转误差1。该径向支撑结构能很好地保持透镜共轴精度,减小了温度变化对镜面变形的影响,各项结果满足设计要求,证明了结构设计的合理性。

     

  • [1] DAVID C,CHARLES E M,PHILIP L. NASA Orbiting Carbon Observatory:measuring the column averaged carbon dioxide mole fraction from space[J]. J. Appl. Remote Sensing,2008,023508:15-50. [2] DAVID C. The need for atmospheric carbon dioxide measurements from space:contributions from a rapid reflight of the Orbiting Carbon observatory[R]. Pasadena,California:Atmospheric Carbon Dioxide Measurements From Space,2009,321:1-23. [3] CARL C L,RANDY P,BRETT H,et al.. System for establishing best focus for the Orbiting Carbon Observatory instrument[J]. Optical Eng.,2009,073605:1-3. [4] HUANG E W. Gemini primary mirror cell design[J]. SPIE,1996,2871:291-300. [5] KAERCHAER H. The evolution of the SOFIA telescope system design-lessons learned during design and fabrication[J]. SPIE,2003,4857:251-260. [6] BITTER H,ERDMAN M,HABERLER,et al.. SOFIA primary mirror assembly:structural properties and optical performance[J]. SPIE,2003,4857:266-278. [7] JOHN J B. Precision lens mounting:US,4733945[P]. 1988-04. [8] AHMAD,HUSE R L. Mounting for high resolution projection lenses:US,4929054[P]. 1990-06. [9] PAULR Y J. Opto-Mechanical Systems Design[M]. Boca Raton,Florida:CRC Press Taylor & Francis Group,2006. [10] SUEMATSU Y,TSUNETA S,ICHIMOTO K,et al.. The solar optical telescope of solar-B:the optical telescope assembly[J]. Solar Physics,2008,249:197-220. [11] 辛雪军,陈长征,张星祥,等. 平行光管主反射镜组件的非线性有限元分析[J]. 中国光学与应用光学,2010,3(2):171-174. XIN X J,CHEN CH ZH,ZHANG X X,et al.. Nonlinear analysis of primary mirror subassembly for collimator based on finite element method[J]. Chinese J. Opt. Appl. Opt.,2010,3(2):171-174.(in Chinese) [12] 刘伟. 小型Offner凸光栅光谱成像系统的结构设计及分析[J]. 中国光学与应用光学,2010,3(2):159-162. LIU W. Design and analysis of structure of compact offner spectral imaging system[J]. Chinese J. Optics Appl. Opt.,2010,3(2):159-162.(in Chinese)
  • 加载中
计量
  • 文章访问数:  3842
  • HTML全文浏览量:  424
  • PDF下载量:  1440
  • 被引次数: 0
出版历程
  • 收稿日期:  2011-03-12
  • 修回日期:  2011-04-23
  • 刊出日期:  2011-08-25

目录

    /

    返回文章
    返回

    重要通知

    2024年2月16日科睿唯安通过Blog宣布,2024年将要发布的JCR2023中,229个自然科学和社会科学学科将SCI/SSCI和ESCI期刊一起进行排名!《中国光学(中英文)》作为ESCI期刊将与全球SCI期刊共同排名!