[1] 田贵云, 高斌, 高运来, 等.铁路钢轨缺陷伤损巡检与监测技术综述[J].仪器仪表学报, 2016, 37(8):1763-1780. doi: 10.3969/j.issn.0254-3087.2016.08.008

TIAN G Y, GAO B, GAO Y L, et al.. Review of railway rail defect non-destructive testing and monitoring[J]. Chinese Journal of Scientific Instrument, 2016, 37(8):1763-1780.(in Chinese) doi: 10.3969/j.issn.0254-3087.2016.08.008
[2] 王时丽.基于机器视觉的钢轨表面缺陷检测技术研究[D].西南科技大学, 2016. http://cdmd.cnki.com.cn/Article/CDMD-10004-1017043513.htm

WANG SH L. Research on flaw detection technology of rail surface based on machine vision[D]. Southwest University of Science and Technology, 2016.(in Chinese) http://cdmd.cnki.com.cn/Article/CDMD-10004-1017043513.htm
[3] 杨国涛.钢轨探伤车探伤作业系统自主化研究[J].铁道建筑, 2016(9):124-126. http://d.old.wanfangdata.com.cn/Periodical/tdjz201609031

YANG G T. Study on the autonomy of inspection system for rail flaw detection vehicle[J]. Railway Construction, 2016(9):124-126.(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/tdjz201609031
[4] 冯超, 黎双周, 范中原.基于轨道电路原理的断轨检测方法研究[J].兰州工业学院学报, 2015, 22(4):75-77. doi: 10.3969/j.issn.1009-2269.2015.04.017

FENG CH, LI SH ZH, FAN ZH Y. Research on track fault detection method based on the principle of track circuit[J]. Journal of Lanzhou Institute of Industry, 2015, 22(4):75-77.(in Chinese) doi: 10.3969/j.issn.1009-2269.2015.04.017
[5] 李文超, 张丕状.超声波检测钢轨缺陷及定位的研究[J].核电子学与探测技术, 2012, 32(9):1062-1065. doi: 10.3969/j.issn.0258-0934.2012.09.016

LI W CH, ZHANG P ZH. Research on ultrasonic inspection of rail defects and positioning[J]. Nuclear Electronics & Detection Technology, 2012, 32(9):1062-1065.(in Chinese) doi: 10.3969/j.issn.0258-0934.2012.09.016
[6] MAZZOTTI M, MARZANI A, BARTOLI I, et al.. Guided waves dispersion analysis for prestressed viscoelastic waveguides by means of the SAFE method[J]. International Journal of Solids and Structures, 2012, 49:2359-2372. doi: 10.1016/j.ijsolstr.2012.04.041
[7] 吴斌, 符浩, 何存富.超声导波虚拟相控聚焦方法研究[J].仪器仪表学报, 2013, 34(3):509-516. doi: 10.3969/j.issn.0254-3087.2013.03.005

WU B, FU H, HE C F. Ultrasonic guided wave inspection based on synthetic phase control method[J]. Chinese Journal of Scientific Instrument, 2013, 34(3):509-516.(in Chinese) doi: 10.3969/j.issn.0254-3087.2013.03.005
[8] 李秀明, 黄战华, 李翔宇, 等.二维点列式激光多普勒法测量物体速度[J].光学精密工程, 2014, 22(10):2627-2632. http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201410008

LI X M, HUANG ZH H, LI X Y, et al.. Two-dimensional point laser Doppler velocimeter for velocity measurement[J]. Opt. Precision Eng., 2014, 22(10):2627-2632.(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/gxjmgc201410008
[9] 李一博, 靳世久, 孙立.超声导波在管道中的传播特性的研究[J].电子测量与仪器学报, 2005, 19(5):63-66. http://d.old.wanfangdata.com.cn/Periodical/dzclyyqxb200505016

LI Y B, JIN SH J, SUN L. Study on propagation characteristics of ultrasonic guided wave in pipeline[J]. Journal of Electronic Measurement and Instrument, 2005, 19(5):63-66.(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/dzclyyqxb200505016
[10] 雷正, 涂君, 邱公喆, 等.外加应力下超声导波传播特性仿真研究[J].仪表技术与传感器, 2017(6):125-128. doi: 10.3969/j.issn.1002-1841.2017.06.030

LEI ZH, TU J, QIU G ZH, et al.. Simulation study on transmitting characteristics of ultrasonic guided wave under external stress[J]. Instrument Technique and Sensor, 2017(6):125-128.(in Chinese) doi: 10.3969/j.issn.1002-1841.2017.06.030
[11] LOVEDAY P W. Semi-analytical finite element analysis of elastic waveguides subjected to axial loads[J]. Ultrasonics, 2009, 49(3):298-300. doi: 10.1016/j.ultras.2008.10.018
[12] ALESSANDRO MARZANI. Time-transient response for ultrasonic guided waves propagating in damped cylinders[J]. International Journal of Solids and Structures, 2008, 45:6347-6368. doi: 10.1016/j.ijsolstr.2008.07.028
[13] HAYASHI T, SONG W J, ROSE J L. Guided wave dispersion curves for a bar with an arbitrary cross-section, a rod and rail example[J]. Ultrasonics, 2003, 41:175-183. doi: 10.1016/S0041-624X(03)00097-0
[14] 许西宁, 郭保青, 余祖俊, 等.半解析有限元法求解钢轨中超声导波频散曲线[J].仪器仪表学报, 2014, 35(10):2392-2398. http://d.old.wanfangdata.com.cn/Periodical/yqyb201410032

XU X N, GUO B Q, YU Z J, et al.. Semi-analytical finite elements method for calculating dispersion curves of ultrasonic guided waves in a rail[J]. Chinese Journal of Scientific Instrument, 2014, 35(10):2392-2398.(in Chinese) http://d.old.wanfangdata.com.cn/Periodical/yqyb201410032
[15] 卢耀荣.无缝线路研究与应用[M].北京:中国铁道出版社, 2010:47-48.

LU Y R. Research and Application of Continuous Welded Rail Track[M]. Beijing:China Railway Publishing House, 2010:47-48.(in Chinese)
[16] ROSE J L, AVIOLI M J, MUDGE P, et al. Guided wave inspection potential of defects in rail[J]. NDT&E International, 2004(37):153-161. http://www.sciencedirect.com/science/article/pii/S0963869503001063
[17] 朱力强, 许西宁, 余祖俊, 等.基于超声导波的钢轨完整性检测方法研究[J].仪器仪表学报, 2016, 37(7):1603-1609. doi: 10.3969/j.issn.0254-3087.2016.07.021

ZHU L Q, XU X N, YU Z J, et al.. Study on the method for monitoring railway integrity based on ultrasonic guided waves[J]. Chinese Journal of Scientific Instrument, 2016, 37(7):1603-1609.(in Chinese) doi: 10.3969/j.issn.0254-3087.2016.07.021
[18] 李翔, 陈实.时频结合的失真度测量方法研究[J].国外电子测量技术, 2017, 36(1):27-30. doi: 10.3969/j.issn.1002-8978.2017.01.008

LI X, CHEN SH. Research on time-frequency conjoined scheme for distortion measurement[J]. Foreign Electronic Measurement Technology, 2017, 36(1):27-30.(in Chinese) doi: 10.3969/j.issn.1002-8978.2017.01.008