[1] 程景全.天文望远镜原理和设计[M]. 北京:中国科学技术出版社,2002. CHENG J Q. Principles of Astronomical Telescope Design[M]. Beijing:China Science & Technology Press,2002.(in Chinese) [2] 王富国,张景旭,杨飞,等. 1.2 m SiC主镜轻量化设计与分析[J]. 光学 精密工程 ,2008,16 (专辑):117-122. WANG F G,ZHANG J X,YANG F,et al.. Lightweight design and analysis for a 1.2 m SiC primary mirror[J]. Opt. Precision Eng.,2008,16(Special):117-122.(in Chinese) [3] 杨德华,邵亮. 基于ANSYS UIDL的镜面轴向支撑机构CAE系统的实现[J]. 天文研究与技术 ,2008,5(3):312-318. YANG D H,SHAO L. ANSYS UIDL-based CAE development of axial support system for optics mirrors[J]. Astronomical Res. Technology,2008,5(3):312-318.(in Chinese) [4] NEILL D R,KRABBENDAM V,ANDREW J,et al.. Active tangent link system for transverse support of large thin meniscus mirrors[J]. SPIE,2007,6665:66650F. [5] 杨德华,向伟玮. 摆臂式三点光学镜面支撑系统的研究[J]. 光学技术 ,2005,31(4):580-582. YANG D H,xianG W W. Study on three-swing-jib support system for optics mirror[J]. Opt. Technique,2005,31(4):580-585.(in Chinese) [6] BITTNER H,ERDMANN M,HABERLER P,et al.. SOFIA primary mirror assembly: structural properties and optical performance[J]. SPIE,2003,4857:266-273. [7] SOAR Telescope report. The SOAR telescope-status and prospects .(2003-09-01) .http://www.soartelescope.org/observing/soar-status/?searchterm=the soar telescope-status. [8] 崔向群. 采用主动光学的大口径单块薄镜面的支撑系统 .南京:中科院紫金山天文台,1995. CUI X Q. Support system of large aperture thin monolithic primary mirror with active optics . Nanjing:Purple Mountain Observatory CAS,1995.(in Chinese) [9] YODER P R. 光机系统设计 [M]. 3版. 北京:机械工业出版社,2008. YODER P R. Opto-Mechanical Systems Design[M]. 3rd ed.. Beijing:China Machine Press,2008.(in Chinese) [10] 王建立,陈涛. 空间目标监视用地基高分辨率光电成像望远镜总体需求及关键技术分析[J] .中国光学与应用光学 ,2008,1(1):36-48. WANG J L,CHEN T. General requirments and key technologies of ground-based high resolution OE imaging telescope for space target surveillance[J]. Chinese J. Opt. Appl. Optics,2008,1(1):36-48.(in Chinese)