| [1] ROBICHAUD J,AKERSTROM A,FREY S. Reaction bonded silicon carbide gimbaled pointing mirror[J]. SPIE,2007,6666:66660O. [2] 闫勇,王栋,金光. 大口径SiC反射镜组件研制技术[J]. 光电工程,2010,37(6):108-112. YAN Y,WANG D,JIN G. Design and fabrication technology of large aperture sic mirror assembly[J]. Opto-Electronic Eng.,2010,37(6):108-112.(in Chinese) [3] SUYAMA S,ITOH Y. NTSIC (New-Technology Silicon Carbide):evaluation of microstructure of high-strength reaction-sintered silicon carbide for optical mirror[J]. SPIE,2007,6666:66660K. [4] COHAN L E,MILLER D W. Integrated modeling for design of lightweight, active mirrors[J]. Optical Eng.,2011,50(6):063003. [5] KANEDA H,NAKAGAWA T,ONAKA T. Development of lightweight SiC mirrors for the space infrared telescope for cosmology and astrophysics(SPICA) mission[J]. SPIE,2007,6666:666607. [6] 耿麒先,杨洪波,李延伟. 大口径平背形主镜背部支撑位置优化计算方法[J]. 光学技术,2007,33(6):889-895. GENG Q X,YANG H B,LI Y W. Optimum method of backside support position for large-aperture primary mirror with flat rear surface[J]. Opt. Technique,2007,33(6):889-895.(in Chinese) [7] COHAN L E,MILLER D W. Vibroacoustic launch analysis and alleviation of lightweight, active mirrors[J]. Opt. Eng.,2011,50(1):013002. [8] MASLOV V. Development of a technology for joining glassceramics parts with zero thermal expansion[J]. Opt. Eng.,2008,47(2):023401. [9] 陈永聪,胡永明,李英才. 背部支撑主反射镜的面形分析与支撑点优化[J]. 光子学报,2007,36(9):1730-1733. CHEN Y C,HU Y M,LI Y C. Displacement analyzing and support position optimizing of the main mirror with backside support[J]. Acta Photonica Sinica,2007,36(9):1730-1733.(in Chinese) [10] 王栋,杨洪波,陈长征. 光学表面面形的计算机仿真[J]. 计算机仿真,2007,24(2):298-301. WANG D,YANG H B,CHEN CH ZH. Computer simulation of the optical surface[J]. Computer Simulation,2007,24(2):298-301.(in Chinese) |