经纬仪主镜在支撑系统下的面形变化

赵天骄; 乔彦峰; 孙宁; 谢军

doi:10.3788/CO.20171004.0477

Volume 10 Issue 4

Jul. 2017

Turn off MathJax

Article Contents

Chinese Optics > 2017 > 10(4): 477-483.

ZHAO Tian-jiao, QIAO Yan-feng, SUN Ning, XIE Jun. Surface deformation of theodolite primary mirror under the support system[J]. Chinese Optics, 2017, 10(4): 477-483. doi: 10.3788/CO.20171004.0477

Citation:

ZHAO Tian-jiao, QIAO Yan-feng, SUN Ning, XIE Jun. Surface deformation of theodolite primary mirror under the support system[J]. Chinese Optics, 2017, 10(4): 477-483. doi: 10.3788/CO.20171004.0477

ZHAO Tian-jiao, QIAO Yan-feng, SUN Ning, XIE Jun. Surface deformation of theodolite primary mirror under the support system[J]. Chinese Optics, 2017, 10(4): 477-483. doi: 10.3788/CO.20171004.0477

Citation:

ZHAO Tian-jiao, QIAO Yan-feng, SUN Ning, XIE Jun. Surface deformation of theodolite primary mirror under the support system[J]. Chinese Optics, 2017, 10(4): 477-483. doi: 10.3788/CO.20171004.0477

PDF( 14810 KB)

Surface deformation of theodolite primary mirror under the support system

doi: 10.3788/CO.20171004.0477

ZHAO Tian-jiao^{1, 2
,},
QIAO Yan-feng^{1
,
,},
SUN Ning¹,
XIE Jun^{1, 2}

1.
Changchun Institute of Optics, Fine Mechanics and Physics, Chinese Academy of Sciences, Changchun 130033 China
2.
University of Chinese Academy of Sciences, Beijing 100049, China

Funds:

National Natural Science Foundation of China 51275504

More Information

Corresponding author: QIAO Yan-feng, E-mail:qiaoyf@ciomp.ac.cn
Received Date: 20 Feb 2017
Rev Recd Date: 03 Apr 2017
Publish Date: 01 Aug 2017

Abstract

Abstract

In order to study the effect of support system on surface deformation error of theodolite primary mirror at different working angles under gravity, the 600 mm primary mirror finite element support models in processing state and working state are built using Abaqus software, and the gravity deformation analysis of the primary mirror is also carried out. Then, the related surface deformation tests of the primary mirror at different support systems are carried out using 4D interferometer. As a result, the surface deformation errors RMS of the primary mirror at strip support system and mirror room support system are 16.18 nm and 16.90 nm, respectively. The surface deformation errors of ideal primary mirror in varied elevation angles are analyzed by the finite element method. Combining with the surface deformation error in itself, it is found that the surface deformation error of the primary mirror increases gradually in the process of the optical axis changing from horizontal direction to vertical direction, and the maximum RMS is 19.58 nm. This shows the primary mirror chamber support system has an excellent supporting performance and can satisfy the engineering requirements. It is also verified that the finite element theoretical model of the primary mirror chamber support system is accurate.
- photoelectric theodolite,
- primary mirror,
- support system,
- finite element,
- surface deformation test

FullText(HTML)

References(15)

References

[1]	赵学颜, 李迎春. 靶场光学测量[D]. 北京: 装备指挥技术学院, 2001. ZHAO X Y, LI Y CH. Range optical measurement[D]. Beijing:The Academy of Equipment Command & Technology, 2001. (in Chinese)
[2]	马品仲.大型天文望远镜设计和研究[J].应用光学, 1994, 15(3):6-11. http://www.cnki.com.cn/Article/CJFDTOTAL-JSJC200606098.htm MA P ZH. Design and study on the large astronomical telescope[J]. Applied Optics, 1994, 15(3):6-11. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-JSJC200606098.htm
[3]	杨佳林, 黄巧文.大口径反射镜结构参数优化设计[J].中国空间科学技术, 2011(4):77-33. http://www.cnki.com.cn/Article/CJFDTOTAL-ZGKJ201104012.htm YANG J L, HUANG Q W. Optimized design of structure parameters for large aperture mirrors[J]. Chinese Space Science and Technology, 2001(4):77-83. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-ZGKJ201104012.htm
[4]	李福, 阮萍, 赵葆常.重力作用下平面反射镜变形研究[J].光子学报, 2005, 34(2):272-275. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB20050200T.htm LI F, RUAN P, ZHAO B CH. Study on the surface deformation of flat reflector under gravity load[J]. Acta Photonica Sinica, 2005, 34(2):272-275. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB20050200T.htm
[5]	戴晓霖, 鲜浩, 唐金龙, 等. 8 m能动薄主镜侧支撑设计[J].光学学报, 2015, 35(6):255-262. DAI X L, XIAN H, TANG J L, et al.. Designing of lateral support system for an 8 m active thin mirror[J]. Acta Optical Sinica, 2015, 35(6):255-262. (in Chinese)
[6]	邵亮, 吴小霞, 杨飞, 等. SiC轻量化主镜液压whiffletree支撑系统的改进[J].红外与激光工程, 2014, 43(11):3820-3824. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201411054.htm SHAO L, WU X X, YANG F, et al.. Improvement on hydraulic whiffletree support system for SiC lightweight primary mirror[J]. Infrared & Laser Engineering, 2014, 43(11):3820-3824. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201411054.htm
[7]	伞晓刚, 孙宁, 卓仁善, 等.大口径光电经纬仪主反射镜支撑结构设计[J].光学精密工程, 2013, 21(12):3111-3117. http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201312018.htm SAN X G, SUN N, ZHUO R SH, et al.. Design of supporting structure for primary mirror of large aperture theodolite[J]. Optics and Precision Engineering, 2013, 21(12):3111-3117. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201312018.htm
[8]	李宗轩, 金光, 张雷, 等. 3.5 m口径空间望远镜单块式主镜技术展望[J].中国光学, 2014, 7(4):532-541. http://www.chineseoptics.net.cn/CN/abstract/abstract9165.shtml LI Z X, JIN G, ZHANG L, et al.. Overview and outlook of monolithic primary mirror of spaceborne telescope with 3.5 m aperture[J].Chinese Optics, 2014, 7(4):532-541. (in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract9165.shtml
[9]	张景旭.地基大口径望远镜系统结构技术综述[J].中国光学, 2012, 5(4):327-336. http://www.chineseoptics.net.cn/CN/abstract/abstract8856.shtml ZHANG J X. Overview of structure technologies of large aperture ground-based telescopes[J].Chinese Optics, 2012, 5(4):327-336. (in Chinese) http://www.chineseoptics.net.cn/CN/abstract/abstract8856.shtml
[10]	吴小霞, 杨洪波, 张景旭, 等.大口径球面镜支撑系统的优化设计[J].光子学报, 2009, 38(1):129-132. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB200901028.htm WU X X, YANG H B, ZHANG J X, et al.. Optimal design of support system for the large-aperture sphere mirror[J]. Acta Photonica Sinica, 2009, 38(1):129-132. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB200901028.htm
[11]	王富国, 杨洪波, 杨飞, 等.大口径主镜轴向支撑点位置优化分析[J].红外与激光工程, 2007, 36(6):877-880. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ200706030.htm WANG F G, Yang H B, YANG F, et al.. Optimization and analysis for the axis support points position of the large aperture mirrors[J]. Infrared & Laser Engineering, 2007, 36(6):877-880. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ200706030.htm
[12]	范李立, 张景旭, 姜皓, 等.极轴式望远镜主镜支撑设计[J].红外与激光工程, 2011, 40(3):476-479. http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201201033.htm FAN L, ZHANG J X, JIANG H, et al.. Design of the primary mirror support of equatorial telescope[J]. Infrared & Laser Engineering, 2011, 40(3):476-479. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-HWYJ201201033.htm
[13]	庄茁, 由小川, 廖剑晖, 等.基于ABAQUS的有限元分析和应用[M].北京:清华大学出版社, 2011. ZHUANG ZH, YOU X CH, LIAO J H, et al.. Based on ABAQUS finite element analysis and application[M]. Beijing:Tsinghua Unversity Press, 2011. (in Chinese)
[14]	谢军, 曹立华, 韩光宇, 等.考虑接触边界条件的经纬仪主镜面形误差分析[J].光子学报, 2014, 43(12):1212004. http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201412025.htm XIE J, CAO L H, HAN G Y, et al.. The surface error analysis of theodolite primary mirror considering boundary condition[J]. Acta Photonica Sinica, 2014, 43(12):1212004. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GZXB201412025.htm
[15]	邵亮, 吴小霞, 陈宝刚, 等. SiC轻量化主镜的被动支撑系统[J].光学精密工程, 2015, 23(5):1380-1386. http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201505023.htm SHAO L, WU X X, CHEN B G, et al.. Passive support system of light-weighted SiC primary mirror[J]. Optics and Precision Engineering, 2015, 23(5):1380-1386. (in Chinese) http://www.cnki.com.cn/Article/CJFDTOTAL-GXJM201505023.htm