[1] 宣斌,谢京江,宋淑梅. 多模式组合抛光技术在光学加工中的应用[J]. 光学精密工程,2011,19(1):41-50. XUAN B,XIE J J,SONG SH M. Application of multi-mode combined polishing to optical manufacturing[J]. Opt. Precision Eng.,2011,19(1):41-50.(in Chinese)
[2] 张峰. 空间相机碳化硅反射镜表面硅改性层的组合式抛光[J]. 中国激光,2013,40(7):0716001-1-0716001-5. ZHANG F. Combined type polishing of silicon modification layer on silicon carbide mirror for space camera[J]. Chinese J. Lasers,2013,40(7):0716001-1-0716001-5.(in Chinese)
[3] 刘振宇,罗霄,邓伟杰,等. 大口径非球面的组合加工[J]. 光学精密工程,2013,21(11):2791-2797. LIU ZH Y,LUO X,DENG W J,et al.. Multi-mode optimization for large optical aspheric mirror[J]. Opt. Precision Eng.,2013,21(11):2791-2797.(in Chinese)
[4] JONES R A. Optimization of computer controlled polishing[J]. Applied Optics,1977,6(1):1247-1249.
[5] 张健,代雷,王飞,等. 小磨头自适应抛光抑制高精度非球面中频误差[J]. 光学学报,2013,33(8):0822002-1-0822002-7. ZHANG J,DAI L,WANG F,et al. Restraint of mid-spatial-frequency error aspheric surface by small-tool adaptive polishing[J]. Acta Optica Sinica,2013,33(8):0822002-1-0822002-7.(in Chinese)
[6] 范斌,万勇建,陈伟,等. 能动磨盘加工与数控加工特性分析[J]. 中国激光,2006,33(1):128-132. FAN B,WAN Y J,CHEN W,et al.. Manufacturing features comparing between computer control active-lap and computer control optical surface for large aspheric optics[J]. Chinese J. Laser,2006,33(1):128-132.(in Chinese)
[7] 尹韶辉,徐志强,陈逢军,等. 小口径非球面斜轴磁流变抛光技术[J]. 机械工程学报,2013,49(17):33-38. YIN SH H,XU ZH Q,CHEN F J,et al.. Inclined axis magnetorheological finishing technology for small aspherical surface[J]. J. Mechanical Eng.,2013,49(17):33-38.(in Chinese)
[8] 武建芬,卢振武,张红鑫,等. 光学非球面离子束加工模型及误差控制[J]. 光学精密工程,2009,2(5):414-420. WU J F,LU ZH W,ZHANG H X,et al.. Model of ion beam figuring in aspheric optics and its error control[J]. Opt. Precision Eng.,2009,17(11):2678-2683.(inChinese)
[9] DAI Y F,LIAO W L,ZHOU L,et al.. Ion beam figuring of high-slope surfaces based on figure error compensation algorithm[J]. Applied Optics,2010,49(34):6630-6636.
[10] DEMMLER M,ZEUNER M,LUCA A,et al.. Ion beam figuring of silicon aspheres[J]. SPIE,2011,7934:793416-1-793416-6.
[11] 刘民才,胡晓阳,李壮声. 大口径高精度方形平面光学元部件的研制[J]. 光学技术,2001,27(6):518-521. LIU M C,HU X Y,LI ZH SH. Research of fabricating large quadrate high-precision plane optical elements[J]. Optical Technique,2001,27(6):518-521.(in Chinese)
[12] 曹冲. 大口径光学元件超精密环抛技术研究[D].成都:四川大学,2004. CAO CH. Study on ultra-precision continuous polishing of large aperture optical components[R]. Chengdu:Sichuan University,2004.(in Chinese)
[13] 李俊峰,陈亚,宣斌. 环带抛光技术材料去除理论模型研究[J]. 中国光学与应用光学,2009,2(5):414-420. LI J F,CHEN Y,XUAN B,et al.. Study on material removal theoretical model of zone polishing technology[J]. Chinese J. Opt. Appl. Opt.,2009,2(5):414-420.(in Chinese)
[14] 马志成. 大口径平面光学元件加工方法研究[D].长春:中国科学院长春光学精密机械与物理研究所,2010. MA ZH CH. The study on the methods of fabrication a large aperture flat[R]. Changchun:Changchun Institute of Optics,Fine Mechanics and Physics, Chinese Academy of Sciences,2010.(in Chinese)
[15] 邓伟杰,郑立功,史亚莉. 基于线性代数和正则化方法的驻留时间算法[J]. 光学精密工程,2007,7(7):1009-1015. DENG W J,ZHENG L G,SHI Y L. Dwell time algorithm based on matrix algebra and regularization method[J]. Opt. Precision Eng.,2007,7(7):1009-1015.
[16] 舒谊,周林,谢旭辉,等. 离子束倾斜入射抛光对表面粗糙度的影响[J]. 纳米技术与精密工程,2012,10(4):365-368. SHU Y,ZHOU L,XIE X H,et al.. Impact of oblique incidence in ion beam figuring on surface roughness[J]. Nanotechnology and Precision Engineering,2012,10(4):365-368.(in Chinese)
DownLoad: