Volume 6 Issue 5
Oct.  2013
Turn off MathJax
Article Contents
XIE Ze-xiao, HAN Zhen-hua, GAO Xiang. Key technologies of monocular vision measurement system with light pen[J]. Chinese Optics, 2013, 6(5): 780-787. doi: 10.3788/CO.20130605.0780
Citation: XIE Ze-xiao, HAN Zhen-hua, GAO Xiang. Key technologies of monocular vision measurement system with light pen[J]. Chinese Optics, 2013, 6(5): 780-787. doi: 10.3788/CO.20130605.0780

Key technologies of monocular vision measurement system with light pen

  • Received Date: 21 Jul 2013
  • Rev Recd Date: 23 Sep 2013
  • Publish Date: 10 Oct 2013
  • In order to achieve the high-precision, large-size, three-dimensional space and real-time measurement of mechanical components, a monocular vision measurement system with a light pen was established. The new technology, algorithm converting model, the optimization of camera focal length and the position calibration of the light pen probe were studied. First, a new type of light pen which was designed by using the photolithography process was proposed. Then, based on resection principle of single image space in the close- range photogrammetry, the new conversion relationship between the light pen coordinate system and the camera coordinate system was established. Optimal exterior orientation elements of single image space was solved by least squares adjustment method in the loop iteration, and basic parameters of the transformation model were determined. Finally, the impacts of focal length on the result of monocular vision measurement system were analyzed, and a method to determine the relatively accurate focus length and the position of light pen probe in the coordinate system of the light pen was proposed. Experimental results indicate that the stability errors in the x-axis, y-axis, z-axis directions of the camera coordinate system are 0.042 733 mm, 0.048 513 mm and 0.066 39 mm, respectively, and the maximum measuring error is 0.173 mm. These results meet the requirements of monocular vision measurement system with a light pen for stability and high accuracy.

     

  • loading
  • [1] 解则晓,孙洪磊,王晓敏. 光笔式双摄像机三维坐标视觉测量系统[J]. 光学技术,2012,38(4):459-461. XIE Z X,SUN H L,WANG X M.Study of the two-light pen-camera type 3D-coordinate measuring system[J]. Optical Technique,2012,38(4):459-461.(in Chinese) [2] 韩延祥,张志胜,戴敏. 基于特征点的单目视觉测量方法[J]. 光学 精密工程,2011,19(5):1111-1115. HAN Y X,ZHANG ZH SH,DAI M. Monocular vision system for distance measurement based on feasture points[J]. Opt.Precision Eng.,2011,19(5):1111-1115.(in Chinese) [3] 黄风山,刘书桂,彭凯. 光笔式视觉测量中被测特征点像面坐标提取方法的研究[J]. 机床与液压,2005,(10):123-125. HUANG F SH,LIU SH G,PENG K. Study of pick-up of coordinates of features-points in an image captured in the lightpen vision measurement[J]. Machine Tool & Hydraulics,2005,(10):123-125.(in Chinese) [4] 刘建伟,梁 晋,梁新合,等. 大尺寸工业视觉测量系统[J]. 光学 精密工程,2010,11(1):127-129. LIU J W,LIANG J,LIANG X H,et al.. Industrial vision measuring system for large dimension work-pieces[J]. Opt. Precision Eng.,2010,11(1):127-129.(in Chinese) [5] 敬泽,薛方正,李祖枢. 基于单目视觉的空间目标位置测量[J]. 传感器与微系统,2011,30(3):125-130. JING Z, XUE F ZH, LI Z SH. Space target location measurement based on monocular vision[J]. Transducer and Microsystem Technologies,2011,30(3):125-130.(in Chinese) [6] 黄风山,刘书桂,彭 凯,等. 光笔视觉测量系统结构参数的自标定与仿真[J]. 光电子·激光,2006,17(6):706-708. HUANG F SH,LIU SH G,PENG K,et al.. Self-calibration and simulation of the structure parameters in a light pen vision measurement system[J]. J. Optoelectronics·Laser,2006,17(6):706-708.(in Chinese) [7] 黄风山,王春梅. 光笔式视觉坐标测量中控制点光斑图像的识别[J]. 光学 精密工程,2007,15(4):588-591. HUANG F SH,WANG CH M. Control points' light spot image recognition in light pen vision coordinate measurement[J]. Opt. Precision Eng.,2007,15(4):588-591.(in Chinese) [8] XU T F,ZHAO P. Precise perimeter measurement for 3D object with a light-pen vision measurement system[J]. Opt. Laser Technol.,2009,4(1):815-819. [9] XU T F,ZHAO P. Precise center location for light spot contour image of light emitting diode control points in light-pen vision coordinate measurement[J]. Optics Eng.,2008,47(12):123602-1-9. [10] 刘长英,高乐,高印寒,等. 单目视觉坐标测量方法[J]. 吉林大学学报,2010,4(5):1279-1282. LIU CH Y,GAO L,GAO Y H,et al.. Measurement of coordinates by single-camera vision[J]. J. Jilin University,2010,4(15):1279-1282.(in Chinese) [11] 张之江,车仁生,黄庆成,等. 测头成像视觉坐标测量系统中特征点成像中心获取[J]. 光学 精密工程,1998,6(5):13-16. ZHANG ZH J,CHE R SH,HUANG Q CH,et al.. Centroid of characteristic point image obtain in probe imaging vision coordi nate measuring system[J]. Opt. Precision Eng.,1998,6(5):13-16.(in Chinese) [12] 张虎,达飞鹏,邢德奎. 光学测量中椭圆圆心定位算法研究[J]. 应用光学,2008,29(6):905-911. ZHANG H,DA F P,XING D K. Algorithm of centre location of ellipse in optical measurement[J]. J. Appl. Optics,2008,29(6):905-911.(in Chinese) [13] 林君建,苍桂华.摄影测量学[M]. 北京:国防工业出版社,2005. LIN J J,CANG G H. Photogrammetry[M]. Beijing:National Defense Industry Press,2005. (in Chinese)
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索
    Article views(2804) PDF downloads(790) Cited by()
    Proportional views
    Related

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return