FENG Gang, FENG Guo-bin, SHAO Bi-bo, YAN Yan, WANG Zhen-bao. Energy measurement of high-repetition-rate pulsed laser[J]. Chinese Optics, 2013, 6(2): 196-200. doi: 10.3788/CO.20130602.0196
Citation:
FENG Gang, FENG Guo-bin, SHAO Bi-bo, YAN Yan, WANG Zhen-bao. Energy measurement of high-repetition-rate pulsed laser[J]. Chinese Optics, 2013, 6(2): 196-200. doi: 10.3788/CO.20130602.0196
FENG Gang, FENG Guo-bin, SHAO Bi-bo, YAN Yan, WANG Zhen-bao. Energy measurement of high-repetition-rate pulsed laser[J]. Chinese Optics, 2013, 6(2): 196-200. doi: 10.3788/CO.20130602.0196
Citation:
FENG Gang, FENG Guo-bin, SHAO Bi-bo, YAN Yan, WANG Zhen-bao. Energy measurement of high-repetition-rate pulsed laser[J]. Chinese Optics, 2013, 6(2): 196-200. doi: 10.3788/CO.20130602.0196
A peak value hold circuit is developed for the energy measurement of a high-repetition-rate pulsed laser. The circuit consisting of four modules including a charge integrator, a 2nd-order Butterworth low-pass filter, a time-delay trigger and a peak-value-holder is designed to convert the photocurrent pulses to voltage pulses which are linear to the energies of incident pulse laser. The experimental measurement results indicate that this circuit is suitable for the pulsed laser with a width less than 10 ns and a repetition rate over 2 kHz. The results show that the circuit has a dynamic range about 140 times and works stably. It can be used to achieve a high spatial resolution in photodiode measurement systems.
[1] MAXIM C. Inexpensive peak detector features droopless operation[EB/OL].(2001-01-26)[2012-07-25].http://www.Maxim-ic.com.cn/appnotes.cfm/an_pk/1163.
[2] JIM McL,BILL T. Precision peak detector uses no precision components[EB/OL].(2004-06-10)[2012-07-25].http://www.edn.com/article/CA421510.html.
[3] SHYAM TIWARI. Sampling peak detector has shutdown feature[EB/OL].(2002-03-16)[2012-07-25].http://www.edn.com/article/CA216167.html.
[4] ANALOG DEVICES. Inc., Monolithic peak detector with reset-and-hold mode:PKD01[EB/OL].[2012-07-25].http://www.analog.com/static/imported-files/data_sheets/PKD01.pdf.
[5] LIU H Y,SHI X J. The design on practical peak value detector with interrupt output[J]. Chinese J. Electron Devices,2003,26(1):104-106.(in Chinese)
[6] YI X J,YE CH SH. Design of high speed digital peak holding circuit based on FPGA[J]. Modern Machinery,2005(4):9-10.(in Chinese)
[7] LIU H B,WANG X SH,CH ZH. Design of transconductance peak holding circuit for fast narrow pulse[J]. Optical Technique,2008,34(suppl):233-235.(in Chinese)
[8] PENG Y,SU H,DONG CH F,et al.. A peak holding circuit for fast narrow pulse[J]. Nuclear Electronics & Detection Technology,2007,27(2):254-256.(in Chinese)
[9] LI Q,LIU SH X,NIE B M. Research on a peak holding and data acquisition circuit for nuclear pulse[J]. J. Electronic Measurement and Instrument,2009(suppl):363-366.(in Chinese)
[10] ZHANG L,SHAO B B,YANG P L,et al.. Diagnosis of high-repetition-rate pulse laser with pyroelectric detector[J]. Chinese Optics,2011,4(4):404-410.(in Chinese)