Turn off MathJax
Article Contents
REN Ming-yang, WANG Li-zhong, FU Bai-qiang, CHEN Ren-hong, WU Hong, WANG Yan-peng. Error correction of glass medium in high temperature digital image correlation deformation measurement[J]. Chinese Optics. doi: 10.37188/CO.2021-0144
Citation: REN Ming-yang, WANG Li-zhong, FU Bai-qiang, CHEN Ren-hong, WU Hong, WANG Yan-peng. Error correction of glass medium in high temperature digital image correlation deformation measurement[J]. Chinese Optics. doi: 10.37188/CO.2021-0144

Error correction of glass medium in high temperature digital image correlation deformation measurement

doi: 10.37188/CO.2021-0144
Funds:  Supported by National Natural Science Foundation of China (No. 51865057); AECC Sichuan Gas Turbine Establishment Entrusted Project (No. J201912024)
More Information
  • In order to correct the measurement error caused by glass medium in high temperature deformation measurement, this paper takes glass medium as a part of camera calibration model. Based on photogrammetry technology and digital image correlation method, a binocular camera calibration method in complex environment is proposed and applied to high temperature deformation measurement. Firstly, aiming at the calibration difficulty caused by the poor image quality in complex environment, the camera imaging model with distortion correction is adopted to complete the binocular camera calibration by bundle adjustment camera calibration method, which improves the success rate and stability of calibration. Secondly, aiming at the problem of low calibration accuracy of binocular camera in complex environment, the influence of lens focal length, ambient light interference and the distance between glass and camera on the calibration results is analyzed, and the optimal calibration parameters are given, so that the calibration reprojection error is reduced from 0.832 pixels to 0.132 pixels. Finally, the measurement error of calibration with and without glass is compared by using the measurement environment with glass medium, which proves that this method can greatly reduce the measurement error. The test results show that this method can effectively reduce the measurement error of displacement field caused by glass medium in high temperature environment. The maximum decrease of measurement error of displacement field in X, Y and Z axes is 76.26 %, 75.02 % and 42.02%, respectively. The method in this paper can achieve high-precision camera calibration in complex environments, and has good calibration stability. It is an effective way to realize accurate measurement of high temperature deformation.
  • loading
  • [1]
    郜魏柯, 杜小平, 王阳, 等. 激光散斑目标探测技术综述[J]. 中国光学,2020,13(6):1182-1193. doi: 10.37188/CO.2020-0049

    GAO W K, DU X P, WANG Y, et al. Review of laser speckle target detection technology[J]. Chinese Optics, 2020, 13(6): 1182-1193. (in Chinese) doi: 10.37188/CO.2020-0049
    [2]
    王永红, 张倩, 胡寅, 等. 显微条纹投影小视场三维表面成像技术综述[J]. 中国光学,2021,14(3):447-457. doi: 10.37188/CO.2020-0199

    WANG Y H, ZHANG Q, HU Y, et al. 3D small-field surface imaging based on microscopic fringe projection profilometry: a review[J]. Chinese Optics, 2021, 14(3): 447-457. (in Chinese) doi: 10.37188/CO.2020-0199
    [3]
    祝祥, 邵双运, 宋志军. 基于线结构光传感器的轨道板几何形貌检测方法[J]. 中国光学,2018,11(5):841-850. doi: 10.3788/co.20181105.0841

    ZHU X, SHAO SH Y, SONG ZH J. A detection method based on line-structured light sensor for geometrical morphology of track slab[J]. Chinese Optics, 2018, 11(5): 841-850. (in Chinese) doi: 10.3788/co.20181105.0841
    [4]
    乔美霞, 潘志伟, 黄生洪, 等. 真空环境下钨材料高温形变的数字相关测量技术研究[J]. 实验力学,2020,35(4):557-566. doi: 10.7520/1001-4888-19-066

    QIAO M X, PAN ZH W, HUANG SH H, et al. Investigation on digital image correlation measurement technique for high temperature deformation of tungsten materials in vacuum environment[J]. Journal of Experimental Mechanics, 2020, 35(4): 557-566. (in Chinese) doi: 10.7520/1001-4888-19-066
    [5]
    MAO W G, WANG Y J, HUANG H Y, et al. In situ characterizations of mechanical behaviors of freestanding (Gd0.9Yb0.1)2Zr2O7 coatings by bending tests under different temperatures based on digital image correlation[J]. Journal of the European Ceramic Society, 2020, 40(2): 491-502. doi: 10.1016/j.jeurceramsoc.2019.07.031
    [6]
    GRANT B M B, STONE H J, WITHERS P J, et al. High-temperature strain field measurement using digital image correlation[J]. The Journal of Strain Analysis for Engineering Design, 2009, 44(4): 263-271. doi: 10.1243/03093247JSA478
    [7]
    HAMMER J T, SEIDT J D, GILAT A. Strain measurement at temperatures up to 800°C utilizing digital image correlation[M]//JIN H, SCIAMMARELLA C, YOSHIDA S, et al. . Advancement of Optical Methods in Experimental Mechanics, Volume 3. Cham: Springer, 2014: 167-170.
    [8]
    GUO X, LIANG J, TANG ZH Z, et al. High-temperature digital image correlation method for full-field deformation measurement captured with filters at 2600°C using spraying to form speckle patterns[J]. Optical Engineering, 2014, 53(6): 063101. doi: 10.1117/1.OE.53.6.063101
    [9]
    SU Y Q, YAO X F, WANG SH, et al. Improvement on measurement accuracy of high-temperature DIC by grayscale-average technique[J]. Optics and Lasers in Engineering, 2015, 75: 10-16. doi: 10.1016/j.optlaseng.2015.06.003
    [10]
    段淇元, 宫文然, 郭保桥, 等. 高温数字图像相关方法中的制斑和图像处理技术[J]. 清华大学学报(自然科学版),2019,59(6):425-431.

    DUAN Q Y, GONG W R, GUO B Q, et al. Techniques of speckle fabrication and imgae processing for high temperature digital image correlation[J]. Journal of Tsinghua University (Science &Technology), 2019, 59(6): 425-431. (in Chinese)
    [11]
    WANG H Q, ZHANG Q, GE P X, et al. Thermal radiation elimination method for high-temperature digital image correlation using polarization camera[J]. Measurement Science and Technology, 2021, 32(6): 065203. doi: 10.1088/1361-6501/abed87
    [12]
    VALERI G, KOOHBOR B, KIDANE A, et al. Determining the tensile response of materials at high temperature using DIC and the virtual fields method[J]. Optics and Lasers in Engineering, 2017, 91: 53-61. doi: 10.1016/j.optlaseng.2016.11.004
    [13]
    胡悦, 王永红, 鲍思源, 等. 高温下数字图像相关散斑最优成像探究[J]. 中国光学,2018,11(5):728-735. doi: 10.3788/co.20181105.0728

    HU Y, WANG Y H, BAO S Y, et al. Optimal imaging of digital image correlation speckle under high temperature[J]. China Optics, 2018, 11(5): 728-735. (in Chinese) doi: 10.3788/co.20181105.0728
    [14]
    LIU M, GUO J, HUI C Y, et al. Application of Digital Image Correlation (DIC) to the measurement of strain concentration of a PVA dual-crosslink hydrogel under large deformation[J]. Experimental Mechanics, 2019, 59(7): 1021-1032. doi: 10.1007/s11340-019-00520-4
    [15]
    LYONS J S, LIU J, SUTTON M A. High-temperature deformation measurements using digital-image correlation[J]. Experimental Mechanics, 1996, 36(1): 64-70. doi: 10.1007/BF02328699
    [16]
    SU Y Q, YAO X F, WANG SH, et al. Refraction error correction for deformation measurement by digital image correlation at elevated temperature[J]. Optical Engineering, 2017, 56(3): 034106. doi: 10.1117/1.OE.56.3.034106
    [17]
    施佳豪, 王庆, 冯悠扬. 基于三维标定板的相机标定方法[J]. 传感器与微系统,2021,40(6):48-51.

    SHI J H, WANG Q, FENG Y Y. Camera calibration method based on 3D calibration plate[J]. Transducer and Microsystem Technologies, 2021, 40(6): 48-51. (in Chinese)
    [18]
    郑冬, 冯鹏, 龙邹荣, 等. 面向多因素工况下的相机标定精度综述[J]. 国外电子测量技术,2020,39(8):109-116.

    ZHENG D, FENG P, LONG Z R, et al. Summary of camera calibration accuracy for multi-factor operating conditions[J]. Foreign Electronic Measurement Technology, 2020, 39(8): 109-116. (in Chinese)
    [19]
    支健辉, 董新民, 孔星炜, 等. 相机标定的外界影响因素分析[J]. 应用光学,2014,35(2):286-291.

    ZHI J H, DONG X M, KONG X W, et al. Analysis of external influence factors in camera calibration[J]. Journal of Applied Optics, 2014, 35(2): 286-291. (in Chinese)
    [20]
    VERBIEST F, PROESMANS M, VAN GOOL L. Modeling the effects of windshield refraction for camera calibration[C]//Proceedings of the 16th European Conference on Computer Vision. Glasgow: Springer, 2020: 397-412.
    [21]
    VALLÉE C, FORTUNÉ D, LERINTIU C. On the dual variable of the Cauchy stress tensor in isotropic finite hyperelasticity[J]. Comptes Rendus Mécanique, 2008, 336(11-12): 851-855.
  • 加载中

Catalog

    通讯作者: 陈斌, bchen63@163.com
    • 1. 

      沈阳化工大学材料科学与工程学院 沈阳 110142

    1. 本站搜索
    2. 百度学术搜索
    3. 万方数据库搜索
    4. CNKI搜索

    Figures(14)  / Tables(1)

    Article views (110) PDF downloads(7) Cited by()
    Proportional views

    /

    DownLoad:  Full-Size Img  PowerPoint
    Return
    Return